Lexmark E260d Manual, Quick Reference

3, 7 Insert the tray. 8 If a different type of paper was loaded than the type previously loaded in the tray, change the Paper Type setting. Note: The difference between the standard 250-sheet tray and the optional 250- and 550-sheet trays is that the standard tray accommodates up to 150 sheets of A…

2, the position for the length of paper you are loading. The tray extends backwards. If you are loading A6-size paper: a Squeeze the length guide tabs together as shown, and slide the length guide toward the center of the tray to the A6 size position. b Raise the A6 length guide. Note:…

4, Lexmark E260d To open the paper stop, pull it so it flips forward. Notes: • Do not leave the paper stop in the open position if you are printing on transparencies. Doing so may cause creases in the transparencies. • When moving the printer to another location, make sure the paper stop is closed. Paper capa…

9, Paper jammed in the manual feeder can usually be grasped and pulled straight out. If the jam cannot be removed this way, check for jammed paper behind the photoconductor kit and toner cartridge unit. For more information, see “Clearing jams behind the photoconductor kit and toner cartridge…

6, 202.yy Paper jam - On - On - On Open the front door, and then open the rear door. 231.yy Paper jam - On - Blinking - On Open the front door, and then open the rear door. 233.yy Paper jam - On - Blinking - Blinking - On Try one of the following: • Remove Tray 1, and then depress the leve…

8, To remove the jam, gently pull the sheet straight out of the standard exit bin. Clearing jams from Tray 1 To see whether paper is jammed in or behind Tray 1, the standard tray: 1 Remove Tray 1. 2 Remove the jammed paper. 3 If necessary, depress the lever to free the paper and remove the …