Lexmark C792 Manual 

3, Streaked horizontal lines appear on prints ABCDE ABCDE ABCDE Try one or more of the following: SELECT ANOTHER TRAY OR FEEDER • From the printer control panel Paper Menu, select Default Source. • For Windows users, select the paper source from Print Properties. • For Macintosh users,…

5, MAKE SURE THE PRINT CARTRIDGE IS NOT LOW ON TONER When 88.xx [color] cartridge low appears, make sure the toner is distributed evenly within the print cartridge. 1 Remove the print cartridge. Warning—Potential Damage: Be careful not to touch the photoconductor drum. Doing so may affect the print…

10, Lexmark C792 MAKE SURE THE PRINT CARTRIDGES ARE INSTALLED CORRECTLY, ARE NOT DEFECTIVE AND NOT LOW ON TONER • Remove the print cartridges. Warning—Potential Damage: Be careful not to touch the photoconductor drum. Doing so may affect the print quality of future print jobs. • Reinsert the print ca…

9, CHECK THE PAPER SIZE SETTING Make sure the paper size setting matches the paper loaded in the tray: 1 From the printer control panel Paper menu, check the Paper Size setting. 2 Before sending the job to print, specify the correct size setting: • For Windows users, specify the size from …

2, Repeating defects appear on prints Try one or more of the following: REPLACE THE PRINT CARTRIDGE Replace the print cartridge of the color with the repeating defect, if the print defects occur in the following instances: • in every 37.7 mm (1.48 in.) of the page • in every 41.6…