Lexmark 13R0243 - X4875 USB 2.0/PictBridge/ 802.11g All-in-One Color Printer Scanner Copier Photo Network Manual

12, Disconnect and reconnect the power cord 1 Disconnect the power cord from the wall outlet, and then from the printer. 2 Plug the cord all the way into the power supply on the printer. 1 2 3 Plug the cord into an electrical outlet that other electrical devices have been using. 4 If th…

49, 5 Select Letter Banner or A4 Banner as the paper size. 6 Select Portrait or Landscape. 7 Click OK. 8 Click OK or Print. Paper continues to jam Are you using paper designed for an inkjet printer? Check the type of paper you are using. Some low-quality papers may be too thin or too slick…

55, Check printer default and pause settings 1 Do one of the following: • In Windows Vista, click  Control Panel. • In Windows XP, click Start. 2 Click Printer or Printers and Faxes. 3 Double-click the printer you want to check. 4 Click Printer. 5 Make sure no check mark appears next to …

32, Checking the print cartridges Are the print cartridges properly installed? For more information, see “Installing print cartridges” on page 94. Are the sticker and tape removed from the cartridges? Lift the scanner unit. Press down on the cartridge carrier latches to raise the cartridge carrier l…

10, 7 Select the Use Windows to configure my wireless network settings check box. 8 Under Preferred Networks, delete any existing networks. a Click the network to be removed. b Click the Remove button. 9 Click Add to create an ad hoc network. 10 In the Network Name (SSID) box, type the nam…

20, Lexmark 13R0243 - X4875 USB 2.0/PictBridge/ 802.11g All-in-One Color Printer Scanner Copier Photo b Select the appropriate connection from the ones shown. Note: If the computer is connected to the access point (router) by an Ethernet cable, the connection may not include the word “wireless” in its name. c Right-click the connection, and then click Repair. Run the wireless setup again If you…