Liebert GXT240VBATT Operation & User’s Manual

6, 6 STABILIZERS / LEVELING FEET When the battery cabinet is located in its final position before or after wiring, it is necessary to fit stabilizer brackets and, if necessary, adjust the leveling feet. If the UPS is wired using a rigid wiring system, then movement of the UPS must be prevented by wind…

5, Liebert GXT240VBATT ELECTRICAL CONNECTIONS The UPS and battery cabinets are supplied with battery terminals on the rear of the UPS within a cable box. (see outline drawing) The cable box (gland plate) can be removed to enable knockouts to be removed, or new holes drilled, to secure the cables. The cable sizes an…

9, 9 Technical Support Global Services 1-800-LIEBERT Applications U.S.A. 1-800-222-5877 Outside the U.S.A. 614-841-6755 U.K. +44 (0) 1793 553355 France +33 (0) 1 43 60 01 77 Germany +49 89 99 19 220 Italy +39 2 98250 1 Netherlands +31 (0) 475 503333 E-mail [email protected] Web site …

7, 7 COMMISSIONING THE UPS WITH OPTIONAL BATTERIES 1. BEFORE STARTING THE UPS OR CLOSING ANY CIRCUIT BREAKERS, verify the proper wiring of the optional battery cabinets. Using a continuity meter, verify that positive (+) terminals are only connected to positive terminals on the rear …

8, 8 LIMITED WARRANTY Liebert Corporation extends the following LIMITED WARRANTY to the purchaser and to its customer (collectively referred to as the "Purchaser"): the enclosed Battery Cabinet and components are free from defects in materials and workmanship under normal us…