Life Fitness SM51 Manual, Unpacking And Assembly Instructions

6, SM51 Unpacking & Assembly Instructions 6 Figure 5. Configuration for 2-3/4” and 3” bolts. 3. Bolt on the connecting beam (part 4 from Figure 2) using a 5/8” socket with extension and combination wrench, to the cells using two of the large 7/16” x 6” bolts, 7/16” washers…

2, SM51 Unpacking & Assembly Instructions 2 The SM51 comes partially assembled. Follow the steps below to complete the assembly. WARNING: COMPONENTS OF THE SM51 ARE LARGE AND HEAVY. USE CAUTION WHEN ASSEMBLING THIS MACHINE. MATERIALS AND TOOLS REQUIRED FOR ASSEMBLY 1/2”, 3/8”, 5/8” &am…

23, SM51 Unpacking & Assembly Instructions 23 0017-00101-1413 0017-00104-0368 0017-00103-0217 Pulley hardware (installed) 1-3/4” Bolt Cap washer 3/8” Nyloc nut 0017-00101-1413 0017-00104-0313 0017-00103-0217 Floating pulley hardware (installed) 1-3/4” Bolt Flat washer 3/8” Nyloc…

19, SM51 Unpacking & Assembly Instructions 19 The part shown in Hardware Figure 3 is the 9/16” cable jam nut that’s used to secure the cables to the weight stacks. Hardware Figure 3. Cable jam nut. M. Cable jam nut Hardware Figure 4 shows the types of cables that are included with the…

13, Life Fitness SM51 SM51 Unpacking & Assembly Instructions 13 ADJUSTABLE CROSSOVER CABLE ROUTING Once you’ve removed the pulleys as described previously, route the adjustable crossover cable on the 4-stack cell as shown in Figure 17. The crossover cable is routed at the factory on the 1 stack cu…