Light & Motion HC3 Owner's Manual

13, Light & Motion HC3 13 Bluefin Monitors - Getting Started Illustrated below are the components of the Compact Monitor and the Remote Monitor. Take time to identify and become familiar with each part. Compact Monitor Remote Monitor Bulkhead Clamp Assembly Monitor Cable Lens Shade Reversing Smart Grip Button Functio…

9, 9 and that the O-rings seat evenly. Operation Left Smart Grip Controls (Refer fig. 12) Far - Moves focus point further from camcorder. Near - Moves focus point closer to camcorder. Photo - Records still video capture to Memory Stick (in either mode). Light - After initial power up from battery pod, …

5, 5 Camera Preparation 1. Install a fully charged Sony NP-FP90 battery. 2. Install a HD DVC tape into your camcorder. 3. If still images are desired, install a Memory Stick Duo. Press the Flash button on the right side of the camcorder to disable the camcorder’s built-in flash preventing the flas…

4, 4 Getting Started Illustrated below are the locations of Bluefin’s features and functions.Take time to familiarize yourself with the housing. Monitor Base Light Arm Base Lens Lock ON/MODE Button Monitor Bulkhead P-Menu Selector Easy Button Flip Filter Lever Manual Button Camera Control …

6, 6 P-Menu Setup The P-Menu is a customizable menu that allows quick access to commonly used camera features.This is very useful underwater since controls such as White Balance can only be accessed through the camera’s menu system. The Bluefin HC3 uses a window mounted rotary control (P-Me…

22, Rear Plate O-rings Smart Grip O-ring Optic O-rings 4) To check O-rings for damage, place the O-ring between the index finger and thumb. Then pull the O-ring through your fingers, feeling for any debris or wear. 5) If O-rings are dirty, it is best to replace them.Washing dirty O-r…