LST 0130 Operation & User’s Manual

24, The third line displays the text information for the element of the current alarm. Is no element text programmed, the second text information for the zone is displayed instead. At installations without elements, the element display is inapplicable. The fourth line displays the last r…

22, LST 0130 3 Displaying and operating elements The functions and effects of the displaying and operating elements of the fire detection control panel Series BC216 and the optional protocol printer are described in this chapter. The operation of the con- trol panel itself is described starting page 29 i…

9, in the expansion of the area surveilled require careful replanning and adaptation of the fire detection system. The fire detection system has to be checked and maintained regularly (at least once a year) by trained and skilled personnel in order to maintain its functions and to av…

16, 2.2 Typical construction of a fire detection system with network control panel BCnet216 Basically the network fire detection control panel BCnet216 does not work differently than described from page 15 in Chapter 2.1: "Typical construction of a fire detection system with contro…

41, If the function "measured value/maintenance" is selected, the LC-display shows the measured value at the time of function selection of this detector. Also displayed is the time that the detector presumably will work reliably without maintenance at stable environmental conditi…

38, 4.7.2 Displaying activated actuations - menu point [Activated actuations] Scroll through all activated actuations by using the ' ↑↓ '-buttons (details see from page 55 in Chapter 5.3: "Activation condition of actuations"). Note that activations of transmitting devices and…