Data: UPD 8th December 2023
LST B524IEFT-1 Smoke Alarm PDF Specification Sheet (Updated: Friday 8th of December 2023 11:49:13 PM)
Rating: 4.6 (rated by 22 users)
Compatible devices: 1151EIS, ASA-45681-210, 2351E, Series 200, 6500R, FWI016-1, M510E-4-20, SIM016-3.
Recommended Documentation:
Text Version of LST B524IEFT-1 Smoke Alarm Manual (Summary of Contents)
(Ocr-Read of Document's Main Page, UPD: 08 December 2023)
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
B524IEFT-1_DBL_LST_EN_0804.PDF • PAGE 1
ABuilding Safety. Building Security.
Isolator Detector Base
B524IEFT-1
Description
Specifi cations
The Isolator Detector Base B524IEFT-1 is designed to
accommodate intelligent fi re detectors Series 200 and
500 for use in ADM loops with System Sensor/200
protocol.
A dual-isolator unit is integrated into the detector base,
which reliably disconnects the loop in case of a short
circuit. With the dual design, the input side or the out-
put side isolator – depending on the location of the
short circuit – interrupts the connection to the faulty
loop segment. Therefore the detector remains in ope-
ration.
Due to its robust multi-wire screw terminals, the detec-
tors can be wired with ease, thus achieving a secure
and durable connection. The base also provides a pos-
sibility for the easy connection of remote indicators.
The base is designed for surface mounting in dry
rooms. For special applications a range of accesso-
ries (for moist room, false ceiling or fl ush installation)
is available.
A mechanical theft protection of the detector can
optionally be activated at the detector base.
• Suitable for automatic detectors
in ADM loop technology with
System Sensor/200 protocol
• Dual-isolator unit
• Screw terminals for secure
connection of multiple wires
• Terminals for connection of remote
indicator
• Mechanical theft protection can be
activated
Current consumption max. 100µA (quiescent)
Ambient temperature -30°C to +70°C
Relative humidity 0 – 93% (no condensation)
Dimensions ø × H 102 × 26 (mm)
Colour cream
Weight 70g
Approval VdS G200100
Order number 246013
Order name Isolator Detector Base/Anal./500/200/SS B524IEFT-1
Recommended:
L32K3, Classic 502-DST Series, LT600-DR/D/L, BT-390
ZX1e, Ei3105RF, VLF-500, Vds BC216-1, BQ2050, MS-5UD Series
-
ImporterELRO Europe | www.elro.euPostbus 9607 - Box E8001006 GC Amsterdam The NetherlandsManufacturer:Siterwell Electronics CO., Limited No.666 Qingfeng Road, Jiangbei District, Ningbo, Zhejiang Province, China 315034 Home is not a place, it’s a feelingFS1105P25%93%40 m²0°C40° ...
Model & Doc Type: FS1105P 2
-
120V AC Wire-In Smoke Alarm Slide Load Front Battery Door, Alkaline Battery, 10 Yr WarrantyModel i5000 DescriptionThe Kidde i5000 is an AC/DC powered, ionization smoke alarm that operates on a 120V power source with 9V alkaline battery backup. This alarm uses ionization sensing technology. Ionizati ...
Model & Doc Type: I5000 2
-
1Thank you for purchasing a Kidde Fyrnetics alarm. Please read through our guide in full. It should be retained for future reference.Kidde Fyrnetics recommends for maximum protection that both ionisation andphoto-electric (optical) smoke alarms be installed. Ionisation sensing alarms ...
Model & Doc Type: 123I 8
-
Doc No. FM0467 issue F Page 1 COMMAKEWe declare this product complies with the relevant UK legislation on condition that it is used in the manner intended, and in accordance with the current installation standards and/or the manufacturer's recommendations. A copy of the fu ...
Model & Doc Type: Aidcall 5
Operating Impressions, Questions and Answers:
