Lucent Technologies SPIRIT 1224 Controller Customer Installation Instructions Manual

Customer Installation Instructions Manual for Lucent Technologies SPIRIT 1224 Controller Telephone, Telephone Accessories (30 pages)

Specifications:

537/537348-spirit_1224_controller_customer_installation_instructions.pdf file (28 Nov 2023)
  • Manufacturer: Lucent Technologies
  • Category of Device: Telephone, Telephone Accessories
  • Document: SPIRIT 1224 Controller, File Type: PDF Customer Installation Instructions Manual
  • Updated: 28-11-2023
  • Count of Pages: 30
Download SPIRIT 1224 Controller Manual (30 pages)

Read PDF Document Online:

Data: UPD 28th November 2023

Lucent Technologies SPIRIT 1224 Controller Telephone, Telephone Accessories PDF Customer Installation Instructions Manual (Updated: Tuesday 28th of November 2023 11:46:26 PM)

Rating: 4.9 (rated by 94 users)

Compatible devices: MERLIN LEGEND Release 6.1, Voice Terminal 8410, 6402, PacketStar PSAX 2300, MERLIN LEGEND Release 3.1 Analog Direct-Line Console, MERLIN LEGEND Reporter, Voice Terminal 8403, MERLIN LEGEND Release 3.1 Single-Line Telephone.

Recommended Documentation:

Text Version of Lucent Technologies SPIRIT 1224 Controller Telephone, Telephone Accessories Manual (Summary of Contents)

(Ocr-Read of Lucent Technologies SPIRIT 1224 Controller Document (Main Content), UPD: 28 November 2023)
  • 25, CAUTION: ● TO REMOVE A CARD, FIRST TURN OFF THE POWER AT THE POWER SUPPLY UNIT(S). ● HANDLE THE CARD BY THE PLASTIC FACEPLATE OR LEVERS ONLY. STATIC DISCHARGE CAN DAMAGE THE CARDS. ● ● ONCE REMOVED, CARDS SHOULD NOT BE SET ON A METAL SURFACE. DO NOT TURN ON THE POWER …

  • 21, Step 6 Connect Controller To Wiring Runs Business (4-pair) Wiring Following the numbers on your wiring run labels, plug one end of a jumper cord into the jack panel box (see page 7). Then pull the cord through the controller the same way you pulled the line cords. Now plug the jumpe…

  • 27, Telephone SeIf Test Your telephones may be tested by running a self test procedure at each telephone set. ● Press INTERCOM. ● Lift receiver. ● Dial # ❋ #. All of the indicator lights on the set should go ON. ● Press any button on the telephone. All of the indicator…

  • 17, Cable clip Cable TELEPHONE LOCATION Modular connecting block Route your other cables and terminate each one in a modular connecting block. Be sure to label both ends of each cable run identically. Typical cable installation for one telephone location. ‘ Identical labels i Finish your installation…

  • 9, ■ B. Mount Controller on Wall If you are installing the 2448 expansion unit when you first put in your SPIRIT system, follow the instructions provided with the expansion unit instead of those in part B. Be sure to mount the controller within six inches of where the power cable will co…

  • 13, Lucent Technologies SPIRIT 1224 Controller Step 4A Business (4-pair) Wiring ■ You may choose to wire your location with 4-pair business wiring to be ready for future communications needs. The materials you will need for this installation are available from your AT&T representative or authorized dealer. List of Materials You will…

DOC-efae5368:

Recommended:
POWERSHOT A75, 925SA, 917.9993A, VAD-WF

owner friendly, PowerTel 680, PCMTIM, HT802, Gigaset S675IP, TLP-107
  • j=jáíÉä=EÇÉëáÖåF=áë=~=êÉÖáëíÉêÉÇ=íê~ÇÉã~êâ=çÑ=jáíÉä=kÉíïçêâë=`çêéçê~íáçåK==«=OMNNI=jáíÉä=kÉíïçêâë=`çêéçê~íáçåK=^ää=çíÜÉê=éêçÇìÅíë=~åÇ=ëÉêîáÅÉë=~êÉ=íÜÉ=íê~ÇÉã~êâë=çÑ=íÜÉáê=êÉëéÉ ...

    Model & Doc Type: 5607 2

  • This guide explains the installation, configuration and operation of the XN120 Expansion Unit including the exchange line and telephone connections. Further information will be supplied with any optional equipment that you have purchased. Please keep all information supplied for future referen ...

    Model & Doc Type: XN120 40

  • Pure IP-PBXDocument Version: 2010-08IP Networking GuideModel No. KX-NCP500/KX-NCP1000 KX-TDE100/KX-TDE200/KX-TDE600KX-NCP500/KX-NCP1000: PBMPR Software File Version 4.1000 or laterKX-TDE100/KX-TDE200: PMMPR Software File Version 4.1000 or laterKX-TDE600: PGMPR Software File Version 4.1000 ...

    Model & Doc Type: KX-NCP500 110

  • Gigaset C610IP Setup Guide The first step is to plug your base station into power and network. Now press the button and the IP address will appear on the screen of the handset. Once you have the IP address, type it into your internet browser. The Default pin is 0000 Click on the Settings tab ...

    Model & Doc Type: C610 ip 3

Additional Information:
# Brand Model Document Type/File Pages File Size Last Checked
1 hq telecom
CT-CID 803
2 29/12
2 Vista
P4-S(E)
12 28/12
3 Siemens
Gigaset S680
77 02/04
4 Samsung
DS-5012L
187 6.89 Mb 25/11
5 Avaya
9611G
2 11/01
6 Black Box
MC160A-R2
40 30/12
7 Panasonic
KX-TD612E
90 25/12
8 Plantronics
CS55
13 20/12
9 Nitsuko
DS01
21 23/03
10 Grandstream Networks
HT801
49 09/11

Popular Right Now:

# Brand Model Document (PDF) Pages Size Check Date
1 FireAngel
LSI-601
28 03.02.2024
2 Chamberlain
LiftMaster Security+ 1356M 1/2HP
36 3.39 Mb 25.02.2024
3 Hitachi
H45MRY
40 29.11.2023
4 Toshiba
T135-S1310
3 15.12.2023
5 SanDisk
80-11-00873
2 0.45 Mb 07.03.2024
6 ProForm
824 Exp
16 29.02.2024
7 Philips
P8
2 7.58 Mb 29.02.2024
8 Sanyo
DVR-S120
40 4.89 Mb 16.12.2023
9 Datexx
DV8
1 0.37 Mb 21.01.2024
10 Sony
SRF-M73 Operating Instructions (primary manual)
15 27.01.2024
Operating Impressions, Questions and Answers: