Lux Products TX9000TS Installation And Operating Instructions Manual

7, • Use UP/DOWN arrows to adjust. • Touch EXIT to return to main display. 6.3. TEMPERATURE CALIBRATION • From the main menu touch MENU . • SCROLL to CAL TEMP. • Touch YES . CAL TEMP will be visible and adjustment value will be flashing. • Use UP/DOWN arrows to adjust offset value. …

4, 18. Verify that the system and its fan are operating properly. When set to a high temperature, the heating system should provide warm air after a short time. Likewise a cooling system should provide cool air after a short time. Usually sound from the furnace and air conditioning uni…

6, • Set the mode switch to HEAT to program the unit for controlling your heater. Set the mode switch to COOL to program the unit for controlling your air conditioner. • Touch MENU . • Use SCROLL to advance to SET/REVIEW HEAT PROGRAMS or SET/REVIEW COOL PROGRAMS. • Touch YES to begin scroll…

12, 12 WARNING: Use Energizer ® or DURACELL ® Alkaline Batteries Only. Energizer ® is a registered trademark of Eveready Battery Company, Inc. DURACELL ® is a registered trademark of The Gillette Company, Inc. DAY MON MORN DA Y EVE NIGHT MORN DA Y EVE NIGHT MORN DA Y EVE NIGHT TUES WED PERIOD…

8, • Maximum Smart Recovery time is one hour. • The Smart Recovery temperature set point must be achievable. If a desired smart recovery is repeatedly ignored by your thermostat. That is an indicator that you should modify your program so that the recovery can be achieved within the 1…

3, Lux Products TX9000TS • Do not install it where there are unusual heating conditions, such as: in direct sunlight; near a lamp, radio, television, radiator, register, or fireplace; near hot water pipes in a wall; near a stove on the other side of a wall. • Do not locate in unusual cooling conditions, such as…