Data: UPD 5th December 2023
Mackie 1620 Music Mixer PDF Hardware Installation (Updated: Tuesday 5th of December 2023 12:31:35 PM)
Rating: 4.8 (rated by 14 users)
Compatible devices: VLZ4, 2404-VLZ3, CFX.mkII, Onyx 1640, DL1608, CR1604-VLZ, ProFX8v2, DL Series.
Recommended Documentation:
Text Version of Mackie 1620 Music Mixer Manual (Summary of Contents)
(Ocr-Read of Document's Main Page, UPD: 05 December 2023)
Rack Ear Kit Installation Instructions
LOUD Technologies Inc. • 16220 Wood-Red Road NE
Woodinville • WA • 98072 • 800/258-6883
Outside the U.S. call 425/487-4333 • FAX 425/487-4337
© 2004 LOUD Technologies Inc. All Rights Reserved.
Part No. 0009389 Rev A 03/04
Rack Ear Kit Installation Instructions
The Rack Ear Kit allows the Onyx 1620 mixer to be mounted in a standard 19" rack, where it will look rather super. The
mixer will take up 12 rack spaces, and you should allow an extra 1 or 2 rack spaces above to make your connections. The
kit contains two rack ear brackets and four screws (longer than the original screws, with a captive washer).
Tools Required:
One Phillips screwdriver.
Procedure:
1. Turn off the mixer, and disconnect the power cord, and all connecting cords.
2. Place the mixer face up on a soft and dry at surface.
3. Remove the four screws as shown below, and keep them in a safe place for further use. Do not remove the middle
two screws on each side, as these remain in place. If you are not planning on using the old screws again, take them
down to your local recycling plant. They may give you some money just to go away.
4. Using only the new screws supplied, secure the rack ear brackets to each side of the mixer as shown. Hand-tighten
the screws securely. The brackets are identical, so it does not matter which one goes on which side.
5. Offer up the mixer to your rack and secure it in place with eight rack screws (not supplied). Remember to leave
enough room at the top so you can easily make your connections.
6. That's about it really. Take the rest of the day off; you have done well.
Recommended:
BR 104, DCB3070/10, L1000A, Tc2100 - Server - 128 MB RAM
SX3242FX, Integrity SL, 4, CDM-3600, DJM-S9, ALPHA - SETUP GUIDE FOR MAC
-
SERVICE MANUALHAMAMATSU, JAPAN■ CONTENTSSPECIFICATIONS ( 総合仕様 ) .......................................................3/5PANEL LAYOUT ( パネルレ イアウ ト )...............................................7CIRCUIT BOARD LAYOUT ( ユニ ッ ト レイアウ ト ) ............ ...
Model & Doc Type: EMX512SC 140
-
New Functions in MOTIF XF Version 1.10 1New Functions in MOTIF XF Version 1.10Yamaha has upgraded the MOTIF XF firmware to Version 1.10, adding a number of new functions. This supplement to the Owner’s Manual describes these changes.Editing and storing a Sample Voice as a Mixing V ...
Model & Doc Type: MOTIF XF 1.1 4
-
PA71PLUSMicroMixPower AmplifierOwners ManualSalt Lake City, Utah7/01PA71PLUSMicroMix Power Amplifier• RCA Inputs• XLR Mic Input• Spring-loaded output• Low noise, efficient operationThe PA71 Plus mixes an unbalanced line levelsignal with a mic signal to a powered 1/4" orspeake ...
Model & Doc Type: PA71PLUS 2
-
Alpha MAC Setup Guide Cubase LE Setup When using the Alpha with Cubase LE, it will be best to set the Alpha as the default audio device under the MAC OS utility "Audio MIDI Setup". 1. Go to the main applications folder and choose the Utilities folder. 2. Start the Audio/MIDI Setup uti ...
Model & Doc Type: ALPHA - SETUP GUIDE FOR MAC 2
Operating Impressions, Questions and Answers:
