Madge Networks 802.11b Operation & User’s Manual

8, 2.4 Configuring the Advanced AP After the IP addressing issue is resolved, launch a Web browser on the managing computer. Then, go to “http://192.168.0.1” to access the Web-based Network Manager start page. TIP: For maintenance configuration of an advanced AP, the advanced AP can be reached …

10, 2.4.3 Step 2: Configure IEEE 802.11 Settings Fig. 6. IEEE 802.11b communication settings. Go to the IEEE 802.11, Communication section to configure IEEE 802.11b-related communication settings, including Regulatory Domain, Channel Number, and Network Name (SSID). The number of available RF cha…

7, 2.3 Preparing for Configuration For the user (or administrator) to configure an advanced AP, a managing computer with a Web browser is needed. For first-time configuration of an advanced AP, an Ethernet network interface card (NIC) should have been installed in the managing computer…

25, Madge Networks 802.11b Appendix B: Troubleshooting Check the following first:             Make sure that the power of the advanced AP is on and the Ethernet cables are connected firmly to the RJ-45 jacks of the advanced AP. Make sure that the LED ALV of th…

17, The IP address of the AP can be manually set or automatically assigned by a DHCP server on the LAN. If you are manually setting the IP Address, Subnet Mask, and Default Gateway settings, set them appropriately, so that they comply with your LAN environment. In addition, you can specify the Hos…