Mamiya ZD Back Operation & User’s Manual

78, Mamiya ZD Back 78 [5] Noise Reduction Images taken with the ISO sensitivity set high or with long exposures tend to be grainy. This phenomenon is reduced when the noise reduction function is activated. The default setting is [OFF]. 1 Press the MENU button, and then select [5 Noise Reduction] on the Set…

21, 21 Preparing the Mamiya ZD Back Preparing the Lithium Ion Battery PB401 for Mamiya ZD Back 1. Plug in the battery charger PC401. Plug one end of the power cord into the battery charger PC401 and plug the other end into a power outlet. 2. Charge the battery. Insert the Lithium ion b…

69, 69 [3] Slide Show This activates the slide show in which the images stored on the memory card are displayed sequentially. 1 Select the Playback Menu, and then select [3 Slide Show] with the toggle key . 2 Press the OK button. 3 Select [Start] with the toggle key . 4 Press the OK button to st…

64, 64 [1] Shooting Mode The shooting mode for images is set up on this menu suitable for the subject being photographed. The default setting is [Standard]. See “Basic Setup: Setting the Shooting Mode” (page 45) for further details. [2] Sharpness The sharpness (strength of the outli…

29, 29 It is possible to replace the IR cut filter and low-pass filter on this unit in accord- ance with the conditions of the subject being photographed. Refer to the in- struction manual supplied with the IR Cut Filter and Low-Pass Filter for the replacement procedure. IR Cut Filter YB401…

65, 65 [4] Saturation The saturation for images is set up on this menu. The default setting is [Normal]. See “Basic Setup: Setting the Sharpness, Tone and Saturation” (page 47) for further details. [5] Folder Setting The folder in which recorded images are to be stored is set up on this men…