Manual, Installation Instructions for Manitowoc 30" Q-MODEL ICE MACHINES MYLAR STRIP 7600153 Ice Maker (1 pages)
Data: UPD 22nd March 2024
Manitowoc 30" Q-MODEL ICE MACHINES MYLAR STRIP 7600153 Ice Maker PDF Installation Instructions (Updated: Friday 22nd of March 2024 11:34:45 AM)
Rating: 4.7 (rated by 57 users)
Compatible devices: G-0800, E-0600, I0320, S1470C, K00066, JR/QR0490N, FEMALE COUPLING KIT K00129, QM 20.
Recommended Documentation:
Text Version of Manitowoc 30" Q-MODEL ICE MACHINES MYLAR STRIP 7600153 Ice Maker Manual (Summary of Contents)
(Ocr-Read of Document's Main Page, UPD: 22 March 2024)
7600153 - 30” Q-Model Ice Machines Mylar Strip
Installation Instructions
Install Mylar Strip between Evaporator and Bulkhead
Mylar will cover the joint where the bulkhead attaches to the base. It will extend from the left sidewall past the water
inlet fitting.
1. Remove screws (right and left side) that secure the evaporator to the bulkhead.
2. Remove three screws located between the evaporator and water inlet line. Remove the screw holding the water inlet
fitting.
3. Determine bin switch wire location and cut a slot in the top edge of the Mylar strip (adhesive edge = top).
4. Apply silicone sealant at the bin switch wire entrance and the left side corner (4” each direction) where the base and
bulkhead meet.
5. Pull evaporator away from bulkhead. Place bottom of Mylar strip in sump trough and slip up behind evaporator
(align slot cut in step 3 with bin switch wire). Mylar must extend above bottom evaporator mounting screw
(approximately 2” above gasket/bulkhead joint).
6. Remove paper backing from Mylar. Apply tension to Mylar and work toward the ends to eliminate wrinkles as the
tape is pressed to the bulkhead.
7. Align evaporator extrusion and bulkhead screw holes; puncture Mylar for the bottom screw holes and insert screws.
Install all remaining evaporator screws.
8. Puncture Mylar and insert screws removed in step 2
Manitowoc Ice, Inc.
2110 South 26 Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA
Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879 8005553
Web Site - www.manitowocice.com 07/11/00
Recommended:
QD03, CHG-3101, ZM2, Pro-Stitcher QM30010-2
PRO 48, KUIS185, GI15NDXTS1, 7626473, Horizon HCD1000RHT
-
Model • Modèle • Modelo Model • Modèle • Modelo DIM2500WDB• Owner’s Use and Care Guide• Guide d’utilisation et soin de Propriètaire• Manual de Instructions Pare el Uso y el Cuidado de su UnidadICE MAKER ...
Model & Doc Type: DIM2500WDB 25
-
INTRODUCTIONTo the owner or user: This service manual isintended to provide you and the maintenance orservice technician with the information needed toinstall, start up, clean, maintain and service thisice system.Table of ContentsFOR THE INSTALLER . . . . . . . . . . . . . . . ...
Model & Doc Type: CME1202 31
-
ZANUSSIP R O F E S S I O N A LICE CUBERS130 KG730559Power supply - V,phases, Hz220/240 V, 1N, 50 220/240 V, 1N, 50 220/240 V, 1N, 50 220/240 V, 1N, 50 220/240 V, 1N, 50Net weight - kg. 113 113 113 113 113Noise level - dBA 61.5 61.5 61.5 61.5 61.5 installed-electric 1.05 1.05 1. ...
Model & Doc Type: 730164 2
-
© 2009124” Signature Series Operation / Installation ManualINTRODUCTIONCongratulations on your purchase of a Perlick residential refrigeration product. Celebrating over 91 years of excellence, Perlick is the industry leader in commercial refrigeration systems. Tod ...
Model & Doc Type: 15" signature series 16
Operating Impressions, Questions and Answers:
