Manual, Installation & Adjustment Instructions for Manitowoc 7626473 Ice Maker (1 pages)
Data: UPD 3rd November 2023
Manitowoc 7626473 Ice Maker PDF Installation & Adjustment Instructions (Updated: Friday 3rd of November 2023 06:39:54 AM)
Rating: 4.7 (rated by 61 users)
Compatible devices: IB00820, RF0244, K00106, HR-0200A, Indigo NXT, M-90, S300, CA200.
Recommended Documentation:
Text Version of Manitowoc 7626473 Ice Maker Manual (Summary of Contents)
(Ocr-Read of Document's Main Page, UPD: 03 November 2023)
7626473 LOW PRESSURE CONTROL
Installation/Adjustment Instructions
1 Remove ice sensor probe. Do not reuse. Sensor probe is not used, when low pressure control is installed.
2 Cut flare nut off low pressure control. Using new copper tee, install low pressure cap tube into ice machine
refrigeration system at the line going to the low side
suction service valve. IMPORTANT: Follow instructions
outlined in Service Bulletin, SB-73-93, to install pressure control without removing refrigerant from the ice
machine.
3 Connect new wire harness from control board terminals, 1C and 1D (B and J-models), and 20 and 21 (E and G-
models), to low pressure control using brass screws.
4 Using bracket supplied, mount the low pressure control in the “compressor compartment area” to the bulkhead wall,
corner post, or other convenient location. Do not mount low pressure control in “evaporator area”.
5 Set low pressure control for proper ice thickness:
A. Set differential at 10 psi. This will never change.
B. Start by setting the cutout (high event) at 36 psi.
C. Start the ice machine and check for proper 1/8” bridge thickness.
D. If ice is too thin, increase ice thickness by lowering cutout (high event) set point. Make adjustments in 2 psi
increments.
E. If ice is too thick, decrease thickness by raising cutout (high event) set point. Make adjustments in 2 psi
increments.
F. Do not change 10 psi differential setting.
G. All future ice thickness adjustments must now be made by adjusting the low pressure control cutout (high event)
setting.
Manitowoc Ice, Inc.
2110 South 26 Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA 8010593
Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879 Rev. 11/04/97
Recommended:
VP504 FHDTV10A, Proline, Sorenro 2004, D-911
Designer VT-DS26SB149, S1000M, LTCS20220 series, Portable Icemaker Silver, D400A/W
-
ZANUSSIP R O F E S S I O N A LICE CUBERS 65/80/90 KG730527 730529Power supply - V,phases, Hz220-240 V,1N, 50220-240 V,1N, 50220-240 V,1N, 50220-240 V,1N, 50220-240 V,1N, 50220-240 V,1N, 50220-240 V,1N, 50220/240 V,1N, 50Net weight - kg. 77 77 86 86 89 89 77 89Noise level - dBA 57.8 5 ...
Model & Doc Type: 730162 5
-
T400A/W, MCD400A/W, R400A/W,MFD400A/W, D400A/W Icemakers208600R13801 Church Lane • Easton, PA 18040, USAToll free (800) 523-9361 • (610) 252-7301Fax (610) 250-0696 • www.follettice.comFollowing installation, please forward this manualto the appropriate operations person.Installation, ...
Model & Doc Type: D400A/W 40
-
KitchenAid _FOR THE WAY IT'S MADE. _ICE MAKERUse & Care GudeFor questions about features, operation/performance, parts, accessories or service, call: 1-800-422-1230 or visit our website at...www.kitchenaid.comIn Canada, for assistance, installation and service, call: 1-800-807-6777 ...
Model & Doc Type: W10515654B 76
-
NN 131MNN 201MNN 301MNN 401MNN 501MISTRUZIONI D’USOHOW TO USE ITNOTICE D’EMPLOIGEBRAUCHSANWEISUNGGEBRUIKSAANWIJZINGISTRUCCIONES PARA EL USOMANUAL DE USOBRUKSANVISNINGBRUKSANVISNINGBRUGSANVISNINGKÄTTÖHJEO∆HΓIE∑ XPH∑EΩ∑FABBRICATORI DI GHIACCIOICEMAKING MACHINESEISMASCHINENPRODUCTE ...
Model & Doc Type: N 202M 44
Operating Impressions, Questions and Answers:
