Data: UPD 26th September 2023
Manitowoc K00214 Ice Maker PDF Installation Instructions (Updated: Tuesday 26th of September 2023 07:46:14 PM)
Rating: 4.7 (rated by 69 users)
Compatible devices: F Series, AC-0370, K00372, S300, B200 Series, K00121, K00346, Q.
Recommended Documentation:
Text Version of Manitowoc K00214 Ice Maker Manual (Summary of Contents)
(Ocr-Read of Document's Main Page, UPD: 26 September 2023)
K00214 ADAPTER KIT
Installation Instructions
1. The K00214 kit is used for installing 30" stacked units, Q-0800, Q-1000, QF-2200, and a single 30" S-series ice
machine on a Manitowoc S-970 bin.
2. Installation (bin must be level before starting):
A. Remove existing foam tape from top of bin.
B. Place adapter on bin, as shown. Locate foam tape from kit in the Figure A positions on top of bin, as shown.
Note locations of narrow and wide tape.
C. Place fillers on adapter, as shown. Make sure the two holes from the adapter and fillers are aligned on the side.
D. Using the fillers as templates, drill three 5/32” (4 mm.) holes, .500” (12.7 mm.) deep maximum in bin. Warning:
Do not drill through interior liner. Attach with 10-24 x .750” screws provided.
E. Apply foam tape to the edge of the fillers and on the front and back of the adapter between the fillers in the Figure
B positions. Note: It is recommended to RTV intersections and along front inside edge of foam tape (see Figure
B) to prevent water tracking.
3. Refer to ice machine installation manual for ice machine installation procedures.
Manitowoc Ice, Inc.
2110 South 26
th
Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA
Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879 8013853
Web Site - www.manitowocice.com Rev. 05/12/04
Bin
Fille
Wide Tape From
Kit Both Sides
Adapter
Filler
Narrow Tape From
Kit Both Sides
Installer: It is
Recommended to RTV
Intersections and Along
Front Inside Edge of Foam
Tape to Prevent Water
Tracking
Figure A
Figure B
Recommended:
ACT-7, Cellular Medical Alert, 20672, Spirit 4G MS870
AVALANCHE VKP1150, Somersize, KIM450BL, KML-325MAJ, 48861
-
INSTALL THE ICE MAKERPlease replace current Page 9 in the Installation Guide with this insert. Top/Bottom Freezer ModelsIMPORTANT:■ Depending on your model, you will have one of three styles of connection. Read and follow the instructions specific to your model. ■ You will be working inside ...
Model & Doc Type: ECKMF95 2
-
HCE1010A/W, HME1010A/W, HCE1410A/W, HME1410A/W 1HCE1010A/W, HCE1410A/W, HME1010A/W, HME1410A/W Horizon Elite™ 230 V/50 Hz Ice Machines (Self-contained)801 Church Lane • Easton, PA 18040, USAToll free (877) 612-5086 • +1 (610) 252-7301www.follettice.comFollowing installation, please forward ...
Model & Doc Type: Horizon Elite HME1410A/W 44
-
INTRODUCTIONTo the owner or user: The service manual you arereading is intended to provide you, and themaintenance or service technician, with theinformation needed to install, start up, clean,maintain, and service this ice system.This product contains 2 separate ice makingsystems in one cab ...
Model & Doc Type: FME2404 32
-
Thank you for selecting a Manitowoc Ice Machine, the dependability leader in ice making equipment and related products. With proper installation, care and maintenance, your new Manitowoc Ice Machine will provide you with many years of reliable and economical performance.S0850M ModelIce Machines Inst ...
Model & Doc Type: S0850M 38
Operating Impressions, Questions and Answers:
