Data: UPD 4th February 2024
Manitowoc K00341 Ice Maker PDF Installation Instructions (Updated: Sunday 4th of February 2024 06:26:35 AM)
Rating: 4.3 (rated by 72 users)
Compatible devices: K00346, UnderCounter QM45, RF0300, QM20 Series, Q460, S, K00340, 7622073.
Recommended Documentation:
Text Version of Manitowoc K00341 Ice Maker Manual (Summary of Contents)
(Ocr-Read of Document's Main Page, UPD: 04 February 2024)
K00341
IB-0620/0820/1020
ON A CORNELIUS ENDURO 175 ICE DISPENSER
Installation Instructions
1. Set adapter on dispenser. Position the adapter so that the front flange of the adapter will be up against the front lip of
the dispenser. Adapter may have to be moved towards the back of the dispenser.
2. Using the slotted holes in the adapter as a template, drill four (4) 9/64” diameter holes at the bottom of the slots.
NOTE: Do not drill deeper than 1/4” past the sheet metal. Use a drill stop!
3. Fasten adapter to dispenser using the four (4) #8 screws supplied with the adapter kit.
4. Set the ice machine on top of the adapter. Align holes in ice machine front angle with threaded bosses on the adapter.
5. Secure the ice machine to the adapter with two (2) #8-32 screws supplied with the kit.
6. Set the bin cover on the adapter, move backwards until the cover hits the stop, and lower the plastic cover insuring
that the latch locks.
7. To remove the bin cover, twist the knob, lift up, and pull forward.
Manitowoc Ice, Inc.
2110 South 26
th
Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA
Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879 8014443
Web Site - www.manitowocice.com Rev. 03/31/03
#8 Screw
4 Places
Bin Cover
#8-32 Screw
2 Places
Adapter
Place a large fillet of food grade RTV inside edge
along both sides where adapter touches bin
Deflector must stay in place
Recommended:
ULTRA SILENT QTRE080R, DN-790R, 460MAX, SF35PHSSLP
36”W, Q-0280, IB650, KUIS185JBL3, ICY20
-
ColdFusion Icemaker Adapter Kit Installation Instructions© 2008-2010, IMI Cornelius Inc. 1 of 4 Publication Number: 629096828INSINSTALLATION INSTRUCTIONSFOR ADAPTER KIT P/N 629096828This adapter kit is recommended for use with Cold Fusion Dispensers and Icemakers that measure 30" wid ...
Model & Doc Type: 629096828 4
-
IntroductionThis is the manual for the SCOTSMAN MARSPLIT UNITS models MAR1400 and MAR2000.They are designed to operate only with freshwater.MAR1400 & MAR2000December 2000Page 1Table of ContentsSpecifications ····································� ...
Model & Doc Type: MAR1400 33
-
COPYRIGHT © 2008-2014 Dometic Marine Division. All Rights Reserved.No part of this publication may be reproduced, translated, stored in a retrieval system, or transmitted in any form or by any means electronic, mechanical, photocopying,recording or otherwise without prior written ...
Model & Doc Type: EIR600D 24
-
EdgeStar, 8606 Wall St, Suite 1600, Austin, TX 78754 support.edgestar.com • [email protected] • edgestar.com EDGESTAR IB650 Lid Replacement Tools Required Phillips Screwdriver Step 1: Remove the top panel of the unit Remove the top two screws on each side of t ...
Model & Doc Type: IB650 8
Operating Impressions, Questions and Answers:
