Manitowoc K00368 Manual, Installation Instructions

 
 
           
K00368 ADAPTER KIT 
                                                          Installation Instructions 
 
The K00368 kit is used for installing a Q-0320, Q-0370, Q-0420, QC0700, QF0800, and 22" S-series ice machines on a 
Manitowoc S or B-970 bin. 
1.  Note:  Bin must be level before installation of ice machine. 
A.  Remove the foam tape from the front and sides of the bin where the support angle will be located.  Use the front 
angle to reference the areas where the tape should be removed. 
B.  Place the support angle on the front edge of the bin and position as far forward as possible. 
C.  Locate the four pieces of the 2” long, 3/4” wide foam tape in the front corners, as shown. 
D.  Place the adapters on the bin, as shown.  Make sure the two holes from the support angle and adapters are aligned 
on the side. 
E.  Using the adapters as templates, drill three 5/32” (4 mm.) holes, .500” (12.7 mm.) deep maximum,  in  bin.  
Warning!  Do not drill through the interior liner.  Attach each adapter with three #10-24 x .500” screws 
provided. 
F.  Apply foam tape to the front and back of the bin between the adapters.  Note:  All other required foam tape comes 
preassembled with the support angle and adapters. 
G.  Note:  It is recommended to RTV the tape intersections and along the inside edge of the foam tape to prevent 
water tracking. 
2.  Refer to ice machine installation manual for ice machine installation procedures. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Manitowoc Ice, Inc. 
2110 South 26
th
 Street, P.O. Box 1720, Manitowoc, WI  54221-1720 USA                                                                                                                                                                                                  
Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879                                                  8016243 
Web Site - www.manitowocice.com                                                                                                                                                                  10/04/04 

Foam Tape (.75”W x 2.00”L) 

Typ - Both Front Corners 

Adapters 

#10-24 x .500”L 
Screws Typ  

.75” Wide 

Foam Tape 

Adapter 

Adapter 

.75” Wide Foam 

Tape 

Support Angle 

• 
  SlimLine Power Strider

  Handbook (Power Strider, #SS71MW)

  Power Strider, 11, slimline/power-strider.pdf

• 
  Zebra 2844 Printer

  Printer 2844 Printer Guidance, #5I16KF

  2844 Printer, 38, zebra/2844-printer.pdf

• 
  True Fitness LC900

  True Fitness Tutorial Exercise Bike LC900 (#MX9V8S)

  LC900, 34, true-fitness/lc900.pdf

• 
  Philips HP8190/00

  Guidance (HP8190/00, #X7614Y)

  HP8190/00, 6, philips/hp8190-00.pdf

• 
  Sirona Heliodent plus

  Heliodent plus Medical Equipment - #CHIYS1

  Heliodent plus, 24, sirona/heliodent-plus.pdf

• 
  Valcourt Saguency FP8

  Saguency FP8 Indoor Fireplace - #4C5886

  Saguency FP8, 31, valcourt/saguency-fp8.pdf

• 
  Jenn-Air SVE47500

  Jenn-Air Convection Oven Manual (#Q4QS8A)

  SVE47500, 51, jenn-air/sve47500.pdf

• 
  NXP Semiconductors S32K144 EVB

  #J3J7C9: S32K144 EVB Document

  S32K144 EVB, 45, nxp-semiconductors/s32k144-evb.pdf

• 
  ADC Adtemp 424

  #2A7FED: Adtemp 424 User Guide

  Adtemp 424, 14, adc/adtemp-424.pdf

• 
  NETGEAR N300

  Network Router N300 User Guide, #P19CQX

  N300, 12, netgear/n300.pdf

• Search YouTube Videos for Manitowoc K00368 Device
• Search Google for Manitowoc K00368 Information
• Search Photo of Manitowoc K00368 in Google Images
• Search Twitter for Manitowoc K00368 News