Manitowoc S1400M Installation Use And Care Manual

11, Section 2 Installation Instructions Part Number 80-1631-3 2-3 Electrical Service GENERAL VOLTAGE The maximum allowable voltage variation is ±10% of the rated voltage at ice machine start-up (when the electrical load is highest). Fuse/Circuit Breaker A separate fuse/circuit breaker must be provi…

1, Manitowoc S1400M Thank you for selecting a Manitowoc Ice Machine, the dependability leader in ice making equipment and related products. With proper installation, care and maintenance, your new Manitowoc Ice Machine will provide you with many years of reliable and economical performance. S1400M Model Ice Ma…

26, Maintenance Section 4 4-4 Part Number 80-1631-3 SANITIZING PROCEDURE Use sanitizer to remove algae or slime. Do not use it to remove lime scale or other mineral deposits. Step 1 Set the toggle switch to the OFF position after ice falls from the evaporator at the end of a Harvest cycle. …

30, Maintenance Section 4 4-8 Part Number 80-1631-3 Water Level Probe 1. Remove the water trough. 2. The water level probe normally does not require removal for cleaning. The probe can be wiped and cleaned in place or proceed to step 3. 3. Pull the water level probe straight down to …

31, Section 4 Maintenance Part Number 80-1631-3 4-9 Water Dump Valve The water dump valve normally does not require removal for cleaning. To determine if removal is necessary: 1. Locate the water dump valve. 2. Set the toggle switch to ICE. 3. While the ice machine is in the freeze m…

2, Safety Notices As you work on an S Model Series Ice Machine, be sure to pay close attention to the safety notices in this manual. Disregarding the notices may lead to serious injury and/or damage to the ice machine. Throughout this manual, you will see the following types of safety notice…