Mantis “E” System Owner's Manual And Safety Instructions

9, 8 Maintenance Area Maintenance procedure Frequency Spline male/female connection of the inner drive shaft Inspect/Lubricate 1. Remove center screw, and loosen up other two as shown on the diagram (left). 2. Pull the shaft from the gear housing. 3. Pull and clean internal shaft. 4. L…

3, 2 Safety and Warnings A. Safety Decals Please pay particular attention to the warning and information decals found on various parts of this Line Trimmer Attachment unit. They are an important part of the safety system. These decals must be replaced in time due to abrasion, etc. It is your responsi…

7, Mantis “E” System 6 No tools are required to attach the Line Trimmer to the power head assembly. 1. Pull the spring pin up on the adapter of the power head shaft assembly. (Picture 9) 2. Carefully fit the line trimmer drive shaft into the adapter, making sure that the male spline of the inner drive shaft engages…

12, Specifications, descriptions, and illustrative material in this literature are as accurate as known at the time of publication, but are subject to change without notice. P/N 331704 3/06 MANTIS 1028 Street Road Southampton , PA 18966 (215) 355-9700 2 YEAR LIMITED SERVICE & WARRAN…

1, © 2006 Mantis, Div. of Schiller-Pfeiffer Inc. All Rights Reserved. Owners Manual and Safety Instructions Line Trimmer “E” System …

11, KEY # DESCRIPTION PART # QTY 1 GEAR CASE-ASS’Y 331186 1 2 GEAR CASE 331187 1 3 BEARING 609 331146 1 4 GEAR 331188 1 5 MAIN GEAR HOUSING SHAFT 331189 1 6 BEARING 6201 331190 1 7 SNAP RING 331191 1 8 SEAL 331192 1 9 GEAR CASE COVER 331193 1 10 PINION 331194 1 11 BEARING 61900 331195 1 12 BEARI…