Maretron EMS100 Operation & User’s Manual

3, ®® Revision 1.1 Page iii Table of Contents 1 General .............................................................................................................................. 1 1.1 Introduction .........................................................................…

8, EMS100 User’s Manual Figure 2). You connect the EMS100 to an NMEA 2000 ® network by plugging the male connector into a female receptacle of the NMEA 2000 ® network (note the key on the male connector and keyway on the female connector). Be sure the cable is co…

2, EMS100 User’s Manual Page ii Revision 1.1 Revision History Revision Description 1.0 Original document 1.1 Added information on tachometer connection Added factory default number of flywheel teeth Added information on which fields of transmitted PGN’s are …

13, ®® Revision 1.1 Page 9 EMS100, as this will automatically void the warranty. If service is required, please return the unit to an authorized Maretron service location. …

18, Maretron EMS100 EMS100 User’s Manual Page 14 Revision 1.1 This page intentionally left blank …

15, ®® Revision 1.1 Page 11 Electrical Parameter Value Comment Operating Voltage 9 to 16 Volts DC Voltage Power Consumption <150mA From Battery Load Equivalence Number (LEN) 1 NMEA 2000 ® Spec. (1LEN = 50 mA) Reverse Battery Protection Yes Indefinitely Load Dum…