Data: UPD 16th December 2023
Maretron MS-1035 Switch PDF Installation Instructions (Updated: Saturday 16th of December 2023 01:49:52 AM)
Rating: 4.2 (rated by 77 users)
Compatible devices: CHMX-42, SIM100, FU9075, JGS516PE, VS-07.0HG, SuperStack II 3C16670A, EXT-DVI-841, LINKHUB 5CT HH515V.
Recommended Documentation:
Text Version of Maretron MS-1035 Switch Manual (Summary of Contents)
(Ocr-Read of Document's Main Page, UPD: 16 December 2023)
®®
Installation Instructions
MS-1035, MS-1055-N, MS-1075, MS-1085-N Magnetic Switches
Instructions
Please follow these instructions to connect any of the MS-1035, MS-1055-N, MS-1075, or MS-1085-N to the
NMEA 2000 network via a Maretron SIM100 Switch Indicator Module. The wiring diagram appears in Figure 1
below. The diagram shows a connection to channel #1, but connections to other channels are similar.
1. Connect the two alarm contact terminals of the sensor portion of the magnetic switch to a free switch
channel. The example in Figure 1 shows the sensor portion of the magnetic switch connected to switch
channel 1 with one wire connected to “SW1A”, and the second wire connected to “SW1B”.
2. Use a Maretron DSM250 display (firmware 1.3.5 or higher), the DSM250 viewing function of the Maretron
N2KAnalyzer software, or other Maretron display product capable of configuring the SIM100 to set the
switch channel mode (indicated as “Channel #x Mode” on the DSM250) for the appropriate channel to
“No End of Line Resistor”. For this example, you would set “Channel #1 Mode” to “No End of Line
Resistor”.
3. Supply Power to the NMEA 2000 network and verify that the switch channel indicates an “off” (alarm)
state using Maretron N2KView software, N2KAnalyzer, or other product capable of displaying switch
indicator state.
4. Place the magnetic portion (the part with no connected wires) of the switch close to the sensor portion
(the part with connected wires) of the switch and verify that the switch channel indicates an “on” (normal)
state during the test.
MS-1035, MS-1055-N,
MS-1075, or MS-1085-N
Copyright © 2008 Maretron, LLP All Rights Reserved P/N: M001805 Rev.1.1 9/08
For installation support, please contact:
Maretron, LLP
9014 N. 23
rd
Ave #10
Phoenix, AZ 85021-7850
Telephone: (+1) 877-550-9100
E-mail: [email protected]
Web: http://www.maretron.com
1 2 5 4 3 6 7 8 9 10 11 12
SW1A
SW2B
SIM100 Screw Terminals
Sensor
Portion
Magnetic
Portion
SW1B
SW2A
SW3A
SW3B
SW4A
SW4B
SW5A
SW5B
SW6A
SW6B
Figure 1 - Wiring Diagram
Recommended:
Aria, Media Center m400 - Desktop PC, RT-AC66U, JT 1000
4000, SmartSTACK EPIM1000-S1LX, Unified 500 Series, AVSW-DVI8X1, Supernova 7210
-
TR TR 610 top2 TR 612 top261001026120102GBTR 610 top2 TR 612 top2Current connection required for smooth zero-crossing switch operation (see connection diagram)!Assembly and operating instructions Time switch GBEDP309164 06MENU OK 1 06 12 18 24 2 p o t 0 1 6 R T 2,5mm 2 0,5mm - 2 m ...
Model & Doc Type: TR Series 12
-
ENTERPRISE & MOBILITY Deploying Brocade Mobility Products with the Brocade FastIron CX Series Step-by-step guide from unpacking Brocade Mobility controllers and access points to configuring devices and setting up wireless connectivity. ...
Model & Doc Type: FCX624S-HPOE 16
-
User Manual v3.1.0iCOMPEL Deployment Manager (IDM) v3.1.0IDM-AP-100 IDM-VM-100 IDM-AP-500 IDM-VM-500 IDM-AP-1000 IDM-VM-1000 IDM-AP-1500 IDM-VM-1500 Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)FREE technical support 24 hours a day, 7 days a week: Call 724- ...
Model & Doc Type: IDM-AP-100 76
-
Enclosed SwitchD4MCEconomical, High Utility Enclosed Switch■ Enclosed Switches with Built-in Basic Switches for High Repeatability and Durability of 10 Million Operations Minimum.■ Panel mount versions have the same operating position as Z Basic Switch.■ Suitable for applications deman ...
Model & Doc Type: D4MC-5000 14
Operating Impressions, Questions and Answers:
