Maretron WSO100 Operation & User’s Manual

6, WSO100 User’s Manual 2. High Enough to have a clear view of the sky to the horizon in all directions unblocked by sails or boat structures – The WSO100 provides the best readings when wind through it is unimpeded by sails or structures on the boat. 2.3 Mounting the WSO100 …

14, WSO100 User’s Manual Page 10 Revision 1.2 Electrical Parameter Value Comment Operating Voltage 9 to 16 Volts DC Voltage Power Consumption <150mA Average Current Drain Load Equivalence Number (LEN) 3 NMEA 2000 ® Spec. (1LEN = 50 mA) Reverse Battery…

11, ®® Revision 1.2 Page 7 requires no user configuration. However, some of the WSO100 parameters are user configurable as described below: • Installation Offset – As shipped from the factory, the WSO100 will read 0° apparent wind direction when the wind blows into…

7, ®® Humidity Sensor Orient pole mount base so that this hole will face forward Mounting Screw Lock Washer NMEA 2000 ® Cable Standard Marine Pole Mount Pole Mount Base Sensor Figure 1 – Mounting the WSO100 to a Standard Marine Pole Mount Revision 1.2…

12, WSO100 User’s Manual Page 8 Revision 1.2 4 Maintenance Regular maintenance is important to ensure continued proper operation of the Maretron WSO100. Perform the following tasks periodically: • Clean the unit with a soft cloth. Do not use chemical cleaner…

18, Maretron WSO100 WSO100 User’s Manual Page A2 Appendix A – NMEA 2000 ® Interfacing Revision 1.2 Field 1: SID – The sequence identifier field is used to tie related PGNs together. For example, the WSO100 will transmit identical SIDs for 130306 (Wind Data) and 130311 (Environmental Para…