Marksman X3 Installation And Owner's Manual

1, Installation and Owner’s Manual Model: X3 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) This device must accept any interference received, including interference that may …

9, 9 1. Press the LOCK button to increase sensitivity by 1 step (1 chirp) 2. Press the UNLOCK button to decrease the sensitivity by 1 step (1 chirp) 3. Rap on the vehicle body panels and glass to achieve the proper setting. Note: If you hear 2 chirps while making an adjustment, you have reache…

11, 11 Owners Manual (Continued) F. Manual Disarming “Unlock” 1. Press the “Unlock” button on the transmitter. 2. The siren will chirp twice and parking lights will flash twice indicating that the security system is now disarmed. The vehicle doors will unlock disarming when interfaced…

7, Marksman X3 7 Step 3 Press the “Lock” button on the first transmitter until you hear a confirmation chirp/beep. The transmitter is now coded into the system. Repeat for each additional transmitter. When finished, turn Off the ignition key or wait for 15 seconds to get out of transmitter programmi…

8, 8 Alarm Feature Programming (continued) LED Flash/ Chirp (Default Setting) ” ff O“ psri h C ”nO“ psrihC 1 Manual Arming 2 Automatic Arming without Door Locking Ignition On/Off with Door Lock/Unlock Ignition On/Off without Door Lock/Unlock “On” m r a eR o tu A…

6, 6 87 87a 86 85 30 Brown Wire To +12V To Horn +12V or Ground Depending on System Requirements Fuse Red/White Wire: (When programmed for (-) Domelight Supervision Output) When Programmed for this function, the Red/White wire provides a (-) output to turn on the vehicles interior l…