Marshall Electronics M-LCD7-HDI Operation & User’s Manual

7, Marshall Electronics M-LCD7-HDI 7M-LCD7-HDI Manual Operation After connecting to power, the unit will be in standby mode (red light). Press the power button on the unit or on the remote control and the buttons of the unit will light up blue. Press the same button again and the unit will return to standby mode. (Note t…

6, 6 M-LCD7-HDI Manual Picture 4 (VGA cable) 1. Female 9-pin jack connects to male 9-pin plug on picture 3 2. 15-pin VGA signal input end connects to computer VGA port ■ Connection 1. Connect SKS input end of the AV cable (picture 3) into the AV input jack of the monitor. The …

9, 9M-LCD7-HDI Manual Note: when you select “USER,” a mini box will appear on the bottom right corner of the OSD, as pic- tured below: ■ (Adjust):  Auto Cong: To automatically adjust to factory default setting If the auto adjust is not satisfactory, use manual adjust.  H P…

15, 15M-LCD7-HDI Manual Warranty Marshall Electronics warranties to the rst consumer that this M-LCD7-HDI LCD monitor will, under normal use, be free from defects in workmanship and materials, when received in its original container, for a period of one year from the purchase date. This war…

10, 10 M-LCD7-HDI Manual ■ Language: language selection:  H Position: To adjust the picture in horizontal  V Position: To adjust the picture in vertical  OSD Time out: To adjust the clock  Transparent: To adjust the level of transparency ■ (Function):  Reset: Back to t…

1, User Manual Marshall Electronics M-LCD7-HDI M-LCD7-HDI-B-C511 M-LCD7-HDI-B-CE6 M-LCD7-HDI-B-NEL3 Portable 7’’ HDMI TFT LCD Monitor …