Masterbuilt 20070106 Assembly, Care & Use Manual

6, 105 ASSEMBLY INSTRUCTIONS Continued Step 3 Mount control panel by inserting stabilizing screw head into keyhole as shown. Note: Stabilizing screw may need slight adjustment for snug fit. Step 4 Secure control panel to smoker with (2) m5X.08x10 panhead screws provided. Note: Do no…

7, Masterbuilt 20070106 It is not necessary to pre-heat this unit. Note: Direct sunlight may interfere with reading LED display, block light if needed. To set temperature: •Press ON button. •Press SET TEMP button once-LED display will blink. •Use +/- to set temperature. •Press SET TEMP button aga…

1, Failure to follow these warnings and instructions properly could result in personal injury or death. Burning wood gives off carbon monoxide which can cause death. DO NOT burn wood chips inside homes, vehicles, tents, garages or any enclosed areas. Use only outdoors where it i…

8, 8 Pre-soak wood chips for at least 30 minutes. Before starting unit, place 1 cup of wood chips in chip loader. Never use more than 1 cup of wood chips at a time. Insert wood chip loader into smoker. Wood chips should be level with top rim of wood chip loader. Turn handle to “Unloa…

2, 14 LIMITED WARRANTY INFORMATION Masterbuilt warrants its products to be free from defects in material and workmanship under proper assembly, normal use and recommended care for 90 days from the date of original retail purchase. Masterbuilt warranty does not cover paint finish as it may…