mcmurdo NAV6 Operation & User’s Manual

20, www.Busse-Yachtshop.de - [email protected] Page 16 Set the filter for each station to one of the following: Setting Notes On Messages from station always displayed Off Messages from station never displayed Auto Messages from station displayed only when nearest or in range depe…

39, www.Busse-Yachtshop.de - [email protected] Page 35 Technical Helpline for assistance Fault Possible Causes ‘ERR’ on the top line of all displays No sensor connected All displays have been set to ‘slave’ – one sensor must be set to ‘master’ More t…

17, mcmurdo NAV6 www.Busse-Yachtshop.de - [email protected] Page 13 7.2 NAVTEX Mode, Print View§ Allows individual messages to be printed. The ‘Print View’ is only displayed if the manual print setting is enabled on the [Setup Mode⇒ ⇒⇒ ⇒NAVTEX View⇒ ⇒⇒ ⇒Options Page]. Pri…

21, www.Busse-Yachtshop.de - [email protected] Page 17 8 NAVIGATE MODE§ Navigate Mode is only available if there is a GPS or other source of NMEA 0183 data connected to the NAV6 NMEA input. The GPS icon in the status bar at the top of the display will be illuminated only if t…

30, www.Busse-Yachtshop.de - [email protected] Page 26 9.5 Setup Mode, NAVTEX View, 518 and 490 Names Pages The station names setup pages determine the names of stations displayed on station filter pages and in NAVTEX message headers. The picture shows the ‘518 Names’ page; …

54, www.Busse-Yachtshop.de - [email protected] Page 50 21 END OF LIFE STATEMENT Disposal The Waste Electrical and Electronic Equipment (WEEE) Directive aims to minimise any adverse impact of electronic equipment on the environment, both during the product lifetime and wh…