Meade 10" & 12.5" Starfinder Instruction Manual

Pro HD WeDgeMODEL #93664ENGLISH1. Loosen the two latitude locking screws on both sides of the wedge (Figure 2).2. Push the tilt plate all the way forward as far as it will go, and hand tighten the locking screws to hold the tilt plate in place.3. Thread back the latitude adjustment ...

Model & Doc Type: 93664 20

How to collimate the R200SS First loosen all the three collimation “push” screws and tighten the other three collimation “pull” screws on the primary mirror cell completely to “reset” the primary mirror to a position where the primary mirror is placed closely to the mirror cell. 1 ...

Model & Doc Type: R200SS 4

C O N G R A T U L A T I O N S ,You have one of the lightest and most versatilespotting/field telescopes in the world. The Nature v i e whas a 60mm. diameter objective lens and has multi-coated optics for an exceptionally clear and crisp view.The extra-long eye relief is easie ...

Model & Doc Type: 78-1645 2

1. Your Cometron FirstScope 76 includes the preassembled base and optical tube, the finderscope assembly, two eyepieces and TheSkyX DVD-ROM astronomy software.2. To install finderscope, remove nuts on side of tube, place bracket over threaded posts and replace the nuts.3. Lo ...

Model & Doc Type: Cometron FirstScope 76 6