Data: UPD 25th March 2024
Meade LX90 Telescope PDF Installation Instructions (Updated: Monday 25th of March 2024 03:09:36 PM)
Rating: 4.2 (rated by 47 users)
Compatible devices: 10" & 12.5" Starfinder, LIGHTBRIDGE mini series, 60AZ-A, 70AZ-AR, LX200, ETX-70AT, LightBridge Plus, DS-2090AT-TC.
Recommended Documentation:
Text Version of Meade LX90 Telescope Manual (Summary of Contents)
(Ocr-Read of Document's Main Page, UPD: 25 March 2024)
Introduction
The LX90 telescope is shipped with the LNT module attached.
However, the lens for the SmartFinder is shipped unattached
so that it is not damaged or scratched during transport.
Assembly
1. The lens for the SmartFinder is shipped with a protective
film to protect the lens coating. Do not remove this film
until told to do so in the instructions.
First peel back the film from just the “tongue” of the
SmartFinder lens.
2. Insert the tongue into the SmartFinder slot. Angle the
tongue towards the front of the LNT module as you slide
it into place.
3. You may need to wiggle the lens/tongue a bit to slide the
tongue into place. You will hear an audible click when the
lens is completely inserted and locked into place.
4. Remove the remainder of the plastic film from the lens,
but avoid touching the lens as you do so—you may
scratch the lens or leave fingerprints.
5.
To clean the surface of the lens, use a camel hair brush
to gently remove the dust. A high-quality lens cleaning
cloth is also acceptable.
If you have a question concerning use of the
Meade
SMARTFINDER, call the Meade Instruments Customer Service
Department at (949) 451-1450. Customer Service hours are
7:00 AM to 6:00 PM, Pacific Time, Monday through Friday.
Installation Instructions
LNT
™
SmartFinder
™
Lens
For use with Meade LX-90 Series Telescopes
Part no. 14-0670-02 Ver. 11-04
Fig. A: Lens with protective film.
Fig. D: Remove the rest of the protective film.
Fig. C: Inset tongue into LNT module slot.
Fig. B: Peel back film from just
the “tongue” of the lens.
Tongue
Slot
Front of LNT
Recommended:
i1800 Series, Voice, FWD-32LX2F, PHOBOS AC A25 230
709AZ3, SkyQuest XT10 9810, Advanced Coma-Free f/8 LX600 with StarLock, 114EQ, #9781 EON 72MM, 60AZ-D
-
FOR 709AZ3Optical Tube: 70mm/900mmAlt-Azimuth Mount: AZ3INSTRUCTION MANUALTelescope Main BodyDust Cap / Mask(Remove before viewing)Dew Cap / Sun ShadeObjective LensTube RingsAccessory TrayTripod LegHeight Adjustment ClampPiggyback BracketFinderscopeFinderscope BracketFinderscope AllignmentS ...
Model & Doc Type: 709AZ3 9
-
Customer Support (800) 676-1343E-mail: [email protected] Offices (831) 763-700089 Hangar Way, Watsonville, CA 95076INSTRUCTION MANUALProviding Exceptional Consumer Optical Products Since 1975Orion® EON™ Apochromatic ED Refractors #9781 EON 72mm, #9927 EON 80mm, #992 ...
Model & Doc Type: #9781 EON 72MM 8
-
ENGLISH | 1Unpack your telescope and verify that all parts are present. Your StarSense Explorer LT includes: a telescope tube with altitude slow motion rod attached, a lens cap, an accessory bag, a tripod with alt-azimuth yoke mount and center leg brace attached, a StarSense smartphone do ...
Model & Doc Type: StarSense Explorer LT 20
-
FITTING INSTRUCTIONSGFC-880N STAY-ON-CASEFITTING THE STRAPNeed more help? Scan the QR code opposite or visit our Youtube channel for an instruc onal video.FA ach strap (F) to both sides of part (B) using the press studs.Repeat this process with the other strap (F) on to both sid ...
Model & Doc Type: C-880N STAY-ON-CASE 2
Operating Impressions, Questions and Answers:
