Meijer HYWN-23 Owner's Manual

6, 6 STEP 3. From behind, thread screws (J) through holes in header (F) and into holes in left and right front panels (D/E). Secure with Phillips screwdriver. DO NOT over-tighten. STEP 4. Set mantel (G) on top of hearth assembly. Thread screws (J) t…

2, Meijer HYWN-23 2 IMPORTANT SAFETY INFORMATION! WARNING  ALWAYS keep electric cords, home furnishings, drapes, clothing, papers, or other combustibles at least 3 feet (0.9m) away from the front of this insert, and away from…

3, 3 WARNING  Risk of electric shock! DO NOT OPEN! No user-serviceable parts inside!  ALWAYS disconnect this unit from the power supply before performing any assembly or cleaning, or before relocating the electric fireplace.  ALWAYS …

7, 7 ANT-TIP SAFETY KIT INSTALLATION A. Secure one bracket (H2) to an inside rear surface of the mantel with two 5/8” screws (H3). Tighten the screws with a Phillips screwdriver. DO NOT over-tighten. B. Position the mantel in the desired locatio…

1, ELECTRIC FIREPLACE MANTEL OWNERS MANUAL Model HYWN-23 ONLY use this fireplace mantel and insert as described in this manual. Any other use is not recommended by the manufacturer, and may cause fire, electric shock, or other personal injury. WARNING! Read and un…