Melitta ME10TDS Use And Care Manual

11, Melitta ME10TDS 11 7. At the end of the brew cycle, press the Power Select Button to OFF. Discard water in the Carafe. Remove used filter and wash the Carafe and Removable Filter Basket in warm, soapy water. Rinse and Dry. 8. When Coffeemaker has cooled, wipe exterior with a dry cloth. IMPORTANT…

6, 6 Before Using Your Thermal Coffeemaker WARNING: To reduce risk of fire or electric shock, do not immerse Cord, Plug or appliance in water or any other liquid. 1. Before preparing coffee in your new coffeemaker, thoroughly clean the Carafe, Carafe Lid and Removable Filter Basket i…

9, 9 Presetting The Brewing Cycle To preset your Coffeemaker to begin brewing at a later time, first fol- low steps 1-3 in the Brewing Instructions section. Check to make sure that the clock is set to the correct time. If it is not, follow the above instructions to set the clock. Press the “CL…

12, In-Warranty Service (USA): For an appliance covered under the warranty period, no charge is made for service or postage. Call for return authorization 1-800-233-9054. Out-of-Warranty Service: A flat rate charge by model is made for out-of-war- ranty service. Include $8.00 (U.S.) for return shipp…

7, 7 4. Close the Hinged Filter Lid. 5. Raise the Water Reservoir Cover. Fill the Thermal Carafe with cold water and pour it into the Water Reservoir to the desired level. No less than two cups are recommended. Important: Always use fresh, cool water in your appliance. Warm water or other liquids, exc…