Melitta MES2B Use And Care Manual

15, 15 6. The indicator light keeps flashing at rapid intervals. Check the following: • the Water Tank must be inserted properly inside the appliance. • there must be enough water in the Water Tank. Fill the Water Tank to the ‘MAX’ fill line. • the appliance may require cleaning. See “Befo…

2, 2 IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: • Read all instructions. • Do not touch hot surfaces. Use handles or knobs. •To protect against fire, electric shock, do not place cord, plugs, or appliance in…

9, 9 8. Place a 32-ounce container below the Drip Spout to collect the water. 9. Press the Power Light/Indicator Button to turn power on, then simultaneously press the 5-ounce and 8-ounce Serving Buttons, see Figure 8. The water from the Water Tank will cycle through the One:One. ™ Note…

8, 8 Note: One Drip Spout has been included in your One:One. ™ Additional Drip Spouts or a special Iced Tea Spout is available. Please refer to page 11 for information on how to order additional Spouts for your One:One. ™ 4. Assemble the Drip Spout to the Pod Chamber. 5. Place the…

6, Melitta MES2B 6 Before Using Your One:One ™ Pod Brewing System Become familiar with all parts of the appliance. Keep your One:One ™ clean Clean and descale your One:One ™ on a regular basis. See “Cleaning and Descaling”, pages 12 - 13. We recommend cleaning the Water Tank and the Drip Spout as wel…