Mesa/Boogie Three Channel Dual & Triple Rectifier Solo Heads Manual, Owner Operating Instructions

10, - 10 - For "stereo" operation, both A and B outputs can be inserted into an effect with mono input and stereo outputs, thus splitting the signal at the effect before the power amp. For mono operation, simply take your choice of jacks and turn the other to zero. RECORDING OUT These jacks c…

11, - 11 - SAMPLE SETTING SHEET FOR QUAD PRE-AMP *MEANS CONTROL PULLED OUT (1) Clean Rhythm 1, Crunch Rhythm 2, Grinding Lead 1, Screaming Lead 2: VOL. TREB. BASS. MID. MAS. LD.DR. LD.MAS. REV. CHANNEL 1 6* 6* 3* 3* 5 6 2½ 3 CHANNEL 2 8* 7* 5 5* 4 4 2½ (2) Clean Rhythm 1, Grinding…

1, Mesa/Boogie Three Channel Dual & Triple Rectifier Solo Heads - 1 - QUAD PRE-AMP OWNER OPERATING INSTRUCTIONS MESA/BOOGIE The Spirit of Art in Technology CONGRATULATIONS! By becoming the owner of the Mesa Quad Pre-amp, you have taken the first step into a new world of tonal freedom. You are among the first of a new breed of players who require the latest in d…

3, - 3 - You will notice a difference in the taper of the two volume controls. This is an intended difference and proves to be an integral part of the Quads versatility. Channel 1's Volume is much like that of the Mark III. Very smooth, responsive and dynamic. The sweet spot is usually found…

8, - 8 - STANDBY SWITCH: The standby switch shuts off the signal at the effect send stage. With the Quad in Standby, noise produced by the effects will still be audible but no signal will be passed to the outputs. If this noise is considerable or undesirable, use the standby switches o…

7, - 7 - REVERB: This control determines the mix between the "dry" (non-effected) and "wet" (reverb) signal. At zero, only the dry signal is heard. As the control is turned up the wet signal is mixed with the dry signal. The result is reverb. The Quad has unique reverb…