Metz 42TN92 Operating Instructions Manual

15, Metz 42TN92 -45- Dynamic Bass Dynamic Bass is used to increase bass ef- fect of the TV set. By pressing a / b button, select Dy namic Bass. By pressing _ / ` button set Dynamic bass to Low, High or Off. It is not recom- mended to select High if listening at high volume levels. There is a subwoofer output…

22, -52- “Default Zoom” Modes: 4:3 Use to view a normal picture (4:3 aspect ra- tio) as this is its original shape. 14:9 Zoom: This z ooms up the wide picture (14:9 aspect ratio) to the upper and lower limits of the screen. Panoramic: This stretches the left and right sides of a norma…

5, -35- On/ O ff switch Volume Up, Volume Down buttons Prog. Up, Prog. Down buttons MENU button TV/AV button Power cord input S-VHS Input (EXT-5S) Video Input Audio Inputss Headphone AudioLineOutss Subwoofer Out PC Audio Input Aerial Scart 2 (EXT-2) Scart 1 (EXT-1) HDMI Input (EXT-6) Component Audio I…

17, -47- Program By pressing a / b button, select Program. Press _ / ` button to select the program number. You can also enter a number via digit buttons on the remote c ontrol. There are 100 program storage between 0 and 99. Band Band can be selected either “C” or “S” by pr…

27, -57- Cleaning and care Before cleaning, the appliance is to be turned off with the main switch! Improper handling and cleaning can damage the screen irreparably. Therefore pay attentionto the rules in regards of the treatment and care of the appliance. Treatment: Treat the surface of the screen ver…

24, -54- Connect Peripheral Equipment There is a wide range o f audio and video equipment that can be connected to your TV. The following connection diagra ms show you where the different (Optional) equipment should be connected at the rear side of the TV. Your PLASMA Television is c…