MGE UPS Systems 1100 Tower Installation And User Manual

23, 3400723200/AC - Page 23 P U L S A R Evolution 1 1 0 0 B A C 4.2 Replacement of the battery module 4. Maintenance Removal of the battery module When replacing batteries, use the Battery Replacement Chart below to determine the correct battery. This operation may be carried out with the UPS su…

19, 3400723200/AC - Page 19 1 2 % % 1 2 % % 3. Operation 3.3 Operation on battery power (following failure of AC-input power) Transfer to battery power The AC-input power is out of tolerances, LED 11 goes ON. During operation on battery power, the buzzer beeps every ten seconds. The eq…

22, Indication LED 12 goes ON and the buzzer sounds contin- uously. Signification UPS electronics have detected a UPS fault. ◗ The connected equipment is no longer supplied. The equipment connected to the UPS is no longer protected. Correction Call the after-sales support depart- ment. Indicati…

24, Page 24 - 3400723200/AC 4. Maintenance Installation of the new battery module Carry out the above operation in reverse order. ◗ CAUTION: risk of electric arc when connecting the battery. ◗ To maintain an identical level of performance and safety, use a battery module identic…

27, MGE UPS Systems 1100 Tower 3400723200/AC - Page 27 5. Environment This product has been designed to respect the environment: It does not contain CFCs or HCFCs. UPS recycling at the end of service life: MGE UPS SYSTEMS undertakes to recycle, by certified companies and in compliance with all applicable regulations, all UPS pr…

3, 3400723200/AC - Page 3 Introduction CAUTION: Safety of persons ◗ The UPS has its own internal power source (the battery). Consequently, the power outlets may be energized even if the UPS is disconnected from the AC-power source. ◗ Dangerous voltage levels are present within the UPS. …