MGE UPS Systems 30A Installation And User Manual

23, 34020113EN/AA - Page 23 3. Operation 3.5 Upsilon STS customization The monitoring parameters must be identical for the two sources. These parameters depend on the tolerances of the connected loads. Return to preferred source after transfer Nominal source voltage Overvoltage thresh…

3, MGE UPS Systems 30A 34020113EN/AA - Page 3 Introduction Thank you for selecting an MGE UPS SYSTEMS product to protect your electrical equipment. The Upsilon STS range has been designed with the upmost care. We recommend that you take the time to read this manual to take full advantage of the many feat…

17, 34020113EN/AA - Page 17 JBUS/MODBUS 2. Installation 2.4 Connection of the communication cards Tie the cables to the cable way on the door. Do not run the control wires with the power cables. Two slots are available in the card cage 5 for additional cards. 2.5 Connection of the JBUS com…

13, 34020113EN/AA - Page 13 PEN N PE PEN S1 S2 N L1 L2 L3 N L1 L2 L3 N L1 L2 L3 PE N PE PE NN S1 S2 N L1 L2 L3 N L1 L2 L3 N L1 L2 L3 PE PE PE S1 S2 N L1 L2 L3 N L1 L2 L3 N L1 L2 L3 2. Installation See section 1.3 for information on accessing t…

11, 34020113EN/AA - Page 11 >250 mm >350 mm 2. Installation 2.1 Positioning Upsilon STS 30 - 60 - 100 - 160 - 250 A (cabinet 1400 mm high) Upsilon STS 30 - 60 - 100 - 160 - 250 - 400 - 600 A (cabinet 1900 mm high) 1 - Unclip the base panels 14 . 2 - Set the cabinet to a level position usi…