MGE UPS Systems 40-150kVA Installation And User Manual

15, Installation and User Manual 1.2 Major Components The following is a description of the cabinets and major components. Refer to Figures 1-5 to 1-8. UPS Cabinet Converts the input AC power to direct current and charges the battery. DC power is converted back to clean AC power by…

22, 1.3.4 Mechanical Specifications (UPS Cabinet Only) Height 66.70 in/1694 mm Width 32.75 in/832 mm Depth 33.42 in/823 mm W eight at 480 VAC in and 480 VAC out 40/50kVA 65/80kVA 100-150kVA 880 lbs/400 kg 970 lbs/440 kg 1460 lbs/662 kg 1.3.5 Environmental Specifications Temperature Operat…

30, Installation and User Manual 2.6.4 AC Output The connections to be made are the three phases, and ground cables from the load source to the UPS. The output cables are terminated at the Output Terminal Block (TB2) for 40-80kVA, and the output busbars for 100- 150kVA. Load cables must be run…

13, System Description and Specifications 1.0 Scope Provides a general description of the Comet 40-150kVA Uninterruptible Power Systems major components, available options, and system specifications. 1.1 General Description The Comet family consists of compact, high-efficiency Uninte…

3, Installation and User Manual i86-160310-00 E00 Comet 40 - 150kVA Installation and User Manual Revision History Comet 40-150kVA UPS Installation and User Manual 86-160310-00 Revision: A00 Initial Release 03/1997 B00 ECN#: 289-91 01/1998 C00 ECN#: 290-30 07/1998 D00 ECN#: 002456 02/2002 E00 EC…

42, MGE UPS Systems 40-150kVA 3.9 Shutdown Procedures 3.9.1 Inverter Shutdown ◗ Press and hold the gray "Inverter OFF" pushbutton for 3 seconds. ◗ The green “Load Protected” LED goes off. ◗ The red “Load Not Protected” LED goes on. ◗ The buzzer sounds. ◗ The Inverter stops if the tran…