MGE UPS Systems EPS 6000 Operation & User’s Manual

46, Figure EPS 6000 Major Internal Components, 2-15 Shared 750 kVA UPS Module UPS Cabinet 2 FRONT VIEW, DOORS AND COVERS REMOVED TOP VIEW, COVER REMOVED INVERTERS (x6) AC OUTPUT CAPACITORS ALBZ K3N K3NZ DC CAPACITORS (BEHIND EACH INVERTER) FAN TRANSFORMER FB9 OUTPUT FUSES FB1 TO FB8 AC CAPACITOR AS…

34, • Inverter current • Load current • Percent current drawn by the load relative to UPS module or SSC rating • Crest factor per phase „ Pushbutton This pushbutton provides access to power and frequency measurements, including: • Main AC input (mains 1) frequency • Bypass AC input…

37, MGE UPS Systems EPS 6000 J: Inverter desynchronized This orange LED indicates that the inverter output frequency is not synchronized with the bypass AC input (mains 2). K: Transfer fault This red LED indicates a transfer fault, which may be one or more of the following conditions: • Inverter output conta…

56, In the individual UPS modules: • Input (isolation) circuit breaker Q1 is in the OFF (open) position. • Battery disconnect circuit breaker QF1 is in the OFF (open) position. • Output isolation circuit breaker Q5N is in the OFF (open) position. In the SSC: • System maintenance bypass circ…

50, Figure General Display Configuration 2-19 The settings selection screens allow the user to configure the display language and set the contrast of the LCD display. To access the settings selection screen, press the settings pushbutton, and follow the steps as indicated in Figure 2-20. F…