Micronics 60/66MHz Manual 

20, Micronics 60/66MHz 3-3 Installing System Memory and Add-On Peripherals System Memory System memory devices, commonly known as SIMMs (Single Inline Memory Modules), are necessary to operate the M5Pi system board. The M5Pi has four SIMM sockets and can be upgraded to 128 Megabytes of RAM. This section will explain th…

17, Table 2-12 lists the jumper settings for case and peripheral connections. Jumper Function Notes J19 PCI IDE Connector Primary J20 ISA IDE Connector Secondary J21 Floppy Connector J18 Parallel Port Connector Can be disabled at the CMOS configuration screen. J12 Serial Port (Com1) Can be di…

48, W-2 Micronics M5Pi System Board Manual Micronics will not be liable for any lost profits or any indirect, special incidental or consequential damages in connection with the product, even if Micronics has been advised of the possibility of such damages. Micronics makes no warranties or rep…

47, W-1 Limited Warranty Except as described below, Micronics warrants the products to be free from defects in material and workmanship in normal use for a period of one (1) year from date of purchase. Should any product fail to perform according to this warranty at any time during the warranty perio…

23, Micronics M5Pi System Board Manual 3-6 Installing a CPU The M5Pi is designed to support 60 or 66MHz Pentium processors. Follow the steps below to install a processor: 1. Turn off the computer and remove the computer cover. 2. Locate the ZIF socket illustrated in Figure 2-1. 3. Lift…