Microtek ScanMaker i800 Plus Start Here Manual

3, 3 To the Hi-Speed USB cable D. Connect one end of the Hi-Speed USB cable to your computer. E. Connect the other end of the Hi- Speed cable to the scanner’s USB port. Step 4: Connect Scanner (cont.) Power button Scanner Buttons The ScanMaker i800 Plus is equipped with six scanner butt…

6, 6 Scanning Film 1. Place the film. To scan film, use the film holder. Refer to “Using the TMA” in this guide for more details. 2. Launch ScanWizard EZ. Follow the step 2 in “Scanning Photos” on previous page to launch ScanWizard EZ. 3. Swtich to ScanWizard EZ - Professional Mode…

2, 2 Step 3: Unlock Scanner Step 4: Connect Scanner Unlocked Locked A. Remove the yellow “Step 3” sticker from your scanner. B. With the scanner power off, tilt the back left corner of the scanner to see the locking switch at the bottom. C. Push the locking switch to the position (…

10, Microtek ScanMaker i800 Plus 10 Do You Need Assistance? Manuals If you have additional questions and need further instruction or information, we provide electronic manuals for: 1. Using your ScanMaker i800 Plus Supplement 2. Using the ScanWizard EZ and ScanPotter scanning software 3. Using the bundled third-party softwa…

4, 4 Using the TMA A. To load film: 1. Load the film inside the EZ-Lock™ Film Holder, with the film’s shiny base facing down. 2. Raise the scanner lid (TMA), and place the film holder with the loaded film on the scanner glass bed. Align the arrows so that the holder is flush against t…

5, 5 Basic Scanning for PC Users Scanning Photos 1. Place the photo. To scan a photo, place the photo on the scanner bed. The top end of the original should be positioned towards the back of the scanner, with the surface to be scanned facing down. NOTE: For the automatic cropping feature to work c…