Minicom RJ-45 Operation & User’s Manual

25, Minicom RJ-45 USER GUIDE BOOTP - When selected, IP Link will contact a BOOTP (Bootstrap Protocol) server in the local sub-net to obtain a valid IP address, gateway address and net mask. IP address Static IP address in the usual dot notation. Subnet mask The net mask of the local network.…

4, SMART IP LINK Appendix A: IP Link Video modes ........................................................................ 35 Appendix B: Key codes.......................................................................................... 36 Appendix C: Pin assignments ......................…

30, SMART IP LINK Init String - Initialization string. The default value works with all modern standard modems connected to a telephone line. For special modems or if connected to a local telephone switch that requires a special dial sequence to connect to the public telephone networ…

27, USER GUIDE Figure 18 Dynamic DNS Settings 3. Check the Enable Dynamic DNS box. 4. Change the settings as desired. Dynamic DNS server - Enter the server name where IP Link registers itself in regular intervals. If left blank the default will be used. Nickname - The nic…

18, SMART IP LINK Figure 13 The Video settings The parameters have the following functions: Brightness - Brightness control. Contrast Red/Green/Blue- RGB contrast control. Black level - Sets the intensity of the color black. Clock - Sets the horizontal frequency for a video line, this depend…