Minolta CF1501 Operator's Manual

144, 7 Advanced Operations 7-26 CF1501/CF2001 2 Touch the arrows to select the de- sired setting, and then touch [Enter]. To adjust the brightness This parameter can be used to adjust the brightness of the image. 1 In the Color Adjustments screen, touch [Brightness]. 2 Touch the arrows to select the de…

267, Appendix 12 CF1501/CF2001 12-7 Finisher FN-108 Specification No. of bins Upper paper output tray, Lower paper output tray Settings • When copying: Non-sort • When printing from the computer: Non-sort, Sort, Group, Sta- ple Paper types • Upper paper output tray “Non-sort” setting: Standar…

236, Minolta CF1501 10 Touch Panel Messages 10-26 CF1501/CF2001 5 Move the two lock release levers for the oil-coating unit in the direction of the arrows. 6 Move the levers (one on each end of the oil-coating unit) in the direc- tion of the arrows and carefully pull out the paper. 7 While holding the lever…

13, Introduction 1 CF1501/CF2001 1-3 • Do not scratch, abrade, place a heavy object on, heat, twist, bend, pull on, or damage the power cord. Use of a damaged power cord (exposed core wire, broken wire, etc.) could result in a fire or breakdown. Should any of these conditions be found, immediately t…

129, Advanced Operations 7 CF1501/CF2001 7-11 * A print job is a print command sent from a computer to the optional printer controller, then printed by this machine. To select the finishing settings 1 Position the document(s) to be copied. (Refer to page 5-1 for more de- tails.) 2 Select the de…

226, 10 Touch Panel Messages 10-16 CF1501/CF2001 10.4 When the Message “Misfeed detected.” Appears If a paper misfeed occurs during copying, the message shown below ap- pears. Follow the procedure below to clear the misfed paper. Locations of Paper Misfeeds  The procedure for cle…