Minolta DI2010 Operation & User’s Manual

152, 7.3 Selecting the Orig. > Copy Settings 7 Di2010/Di2510/Di3010/Di3510 7-29 Specifying Copy Settings Chapter 7 8 Touch and to specify the width of the erased area. ✎ Tip The erased area can be set between 1/4 in. and 3/4 in., in 1/16 in. increments. As a default, the width of …

198, 9.2 When Incorrect Copies Are Printed 9 Di2010/Di2510/Di3010/Di3510 9-3 Troubleshooting Chapter 9 9.2 When Incorrect Copies Are Printed Symptom Possible Cause Remedy The printed output is too light. The “Auto” Density setting is set too light. Adjust the “Default Copy Output…

82, 5.6 Loading Paper 5 Di2010/Di2510/Di3010/Di3510 5-11 Copy Paper Chapter 5 4 Re-adjust the paper guides to fit the size of the paper. 5 Close the paper drawer. Loading Paper Into the Large Capacity Cabinet Load paper into the large capacity cabinet as described below. 1 Press the draw…

13, Minolta DI2010 1 1.4 Components and Their Functions 1-6 Di2010/Di2510/Di3010/Di3510 Introduction Chapter 1 1.4 Components and Their Functions No. Part Name Description 1 Duplexing Document Feeder AFR-19 (optional) Automatically feeds one document sheet at a time for scanning, and automatically turns over …

178, 8.4 When a Paper Misfeed Occurs 8 Di2010/Di2510/Di3010/Di3510 8-19 Touch Panel Messages Chapter 8 To clear a paper misfeed in the multiple bypass tray 1 Pull out any misfed paper from the multiple bypass tray. 2 If the misfed paper cannot be pulled out, pull the lever for the sliding pl…