Minolta 140 Instruction Manual

38, 38 FOCUS-AREA INDICATOR CONTROLS The display of the focus-area indicator can be controlled with a custom function. CUSt-1:1 - The focus-area indicator automatically appears when looking through the viewfinder. CUSt-1:2 - The focus-area indicator appears when the shutter-release button i…

71, 71 3.Press the adjust button or zoom lever until the desired brightness level is displayed. 4.Press the AF mode button or press the shutter-release button partway down to set the brightness level. • The data-panel display returns to normal. • The new brightness level will remain in effect even…

74, 74 CARE AND STORAGE • When photographing in cold weather, it is recommend that you keep the camera and spare batteries inside your coat to keep them warm when you are not shooting. Cold batteries will regain some of their charge when they warm up. • This camera is not waterproof…

12, 12 NAMES OF PARTS Battery-condition indicator (p. 18 ) Frame counter (p. 21 ) Film-transport signals (p. 21 ) Cartridge mark (p. 34 ) Self-timer indicator (p. 53 ) Date/Time display (p. 57 ) (Quartz-Date model only) Autoflash Autoflash with red-eye reduction Fill-flash Flash cancel …

39, Minolta 140 39 2.To change the setting, press the adjust button or zoom lever until the desired setting number is displayed. ADVANCED OPERATION 3.Press the AF mode button once to enter the new setting. • The camera will return to the shooting mode automatically after five seconds. Pressing the A…

70, 70 VIEWFINDER BRIGHTNESS The relative brightness of the AF frame or focus-area indicator can be adjusted. The brightness of the frame lines will continue to adjust automatically in relation to the new level. 1.Press and hold the AF mode button for about two seconds until “CUSt-1” appears…