Minolta APS Camera Instruction Manual

25, 4746 SUBJECT PROGRAM MODES SUBJECT PROGRAM SELECTION •Pressing the program-reset button returns the camera to Full Auto. Fully-automatic operation is suitable for most photographic situations. See page 30. Subject-program selection lets you choose one of the five subject program mode…

7, OPERATING TEMPERATURE AND CONDITIONS • This camera is designed for use from -10° to 50° C (14° to 122° F). • Never leave your camera where it may be subjected to extreme temperatures such as the glove compartment of a car. • At colder temperatures, the data panel response time will be s…

32, SHUTTER CONTROL 6160 S MODE - SHUTTER PRIORITY •The number 60, or 125, displayed in the data panel stands for 1/60th or 1/125th of a second. •If the aperture display in the data panel blinks, the required setting is outside the aperture range of the lens. Turn the control dial unti…

27, 5150 CLOSE - UP MODE 1. Set the command switch to . Tips: •For best results use the V 50mm f/3.5 Macro lens. •Do not use the built-in flash when your subject is closer than 0.6 m (1.64 ft.), lens shadowing may occur. We recommend using the Macro Flash 1200AF Set or the Vectis Flash SF-1 …

23, 4342 FLASH SIGNALS In P mode, the built-in flash will pop-up automatically when the shutter-release button is pressed partway down. Once up, the flash will fire when necessary. •The shutter will not release until the flash is charged. •The built-in flash can provide coverage …

20, Minolta APS Camera 3736 FOCUS SIGNALS When the camera is set to autofocus (AF) mode, pressing the shutter-release button partway down will activate the autofocus system and one of the signals below will appear at the base of the viewfinder. In autofocus mode, the shutter will not release until the focus is confirmed…