Minolta Dimage Dimage Xt Instruction Manual

55, 55 RECORDING WITHOUT A MEMORY CARD If no memory card is installed in the camera, a single still image can be recorded and saved in the camera’s buffer memory. Only the last image captured is stored; each time an image is captured, it replaces the image data saved in the buffer. If the mode dial …

4, 4 FOR PROPER AND SAFE USE WARNING • Only use the battery specified in this manual. •Only use the specified charger or AC adapter within the voltage range indicated on the unit. An inappropriate adapter or current may cause damage or injury through fire or electric shock. • On…

48, 48 RECORDING - ADVANCED OPERATION Spot metering: uses a small area within the image to calculate the exposure. When this mode is selected, the LCD monitor will automatically activate if off and a small circle will appear in the middle of the live image indicating the measuring area. The spot a…

53, 53 INSTANT PLAYBACK After a still image is captured, it can be dis- played on the monitor for two seconds before being saved. Instant playback shows the last frame in the series when used with the continuous-advance drive mode (p. 41). When the LCD monitor is turned off (p. 30), it will automa…

100, 100 DATA-TRANSFER MODE CONNECTING THE REMOTE CAMERA Before the camera can be connected to a computer, the remote camera driver must be installed, see page 98. A fully charged battery should be used when the camera is connected to a computer. The use of the AC adapter (sold separately) is recommend…

51, Minolta Dimage Dimage Xt 51 DATE IMPRINTING Every time a still image is recorded, it is stored with an exif tag that contains the date and time of recording as well as shooting information. This information can be viewed with the camera in the Quick View or playback mode, or on a computer with the DiMAGE Viewer softwar…