Minolta DIMAGE E323 - SOFTWARE Instruction Manual

61, 61 When the “Each-image” setting is chosen, display the desired image to print by using left/right keys. Highlight “SETTING” by using the up/down keys and press the central button to make an order. A screen will appear asking if date imprinting is required and the number of copies. Use …

91, 91 Battery: Two AA alkaline or Ni-MH batteries Or one CR-V3 lithium battery Battery performance (recording): Approximately 80 frames: based on Minolta’s stan- dard test method: alkaline batteries, LCD monitor on, 1600 X 1200 images, normal compression, no instant playback, flash u…

73, 73 CONNECTING TO WINDOWS 98 AND 98SE The driver needs only to be installed once. If the driver cannot be installed automatically, it can be installed manually with the operating system’s add-new-hardware wizard; see the instructions on the following page. During installation, if the operating …

83, 83 Pictures are not sharp. Make sure the subject is within the autofocus range (p. 26). A special situation is pre- venting the autofocus sys- tem from focusing (p. 29). Use the focus-lock function to focus on an object at the same distance as the subject (p. 28). Pictures are taken i…

52, Press the left side of the zoom lever (1) to display the index playback. In the index playback, the left/right and up/down keys of the controller (2) move the orange border around the index thumbnails. In the single-frame advance mode, a thumbnail image can be displayed in the full screen by p…

46, Minolta DIMAGE E323 - SOFTWARE Exposure compensation can also be adjusted with the left/right keys of the controller (1). Press the central button to set (2). The exposure compensation must be set before the image is captured. To set the exposure compensation, the monitor must be on. When you highlight the exposure compensati…