Minolta DYNAX 505 SI SUPER - PART 2 Manual 

6, Minolta DYNAX 505 SI SUPER - PART 2 5958 EXPOSURE – Setting the ISO Manually 1. Turn the function dial to ISO. 2. Press the function button and turn the control dial until the desired ISO value appears in the data panel. Set the film speed manually when you want to override the DX-coded film speed or when using non-D…

11, 6968 FLASH – Wireless/Remote Flash 2. Turn the function dial to WL. 3. Press the function button and turn the control dial until WL and On appear in the camera’s data panel. 1. Attach the accessory flash to the camera, then turn the camera and the flash on. 4. Detach the accessory flas…

12, 7170 Press the spot/AE lock button to test fire the accessory flash. FLASH – Wireless/Remote Flash 3. Press the shutter-release button all the way down to take the picture. 2. Wait until both flash units are fully charged. • appears in the viewfinder when the built- in flash …

10, 6766 In P and A-modes, slow-shutter sync sets a slower shutter speed to increase the background or ambient lighting exposure in a flash picture. Flash output will automatically be decreased to maintain a correct exposure of your subject. FLASH – Slow Sync 1. Frame your subject. 2. While pressing …

23, 9392 SPECIFICATIONS Specifications and accessories are based on the latest information available at the time of printing and are subject to change without notice. Film Transport Loading: Auto load Drive Modes: Single frame, continuous advance (2 frames/sec.), self-timer, exposure bracke…

7, • The built-in flash is set to flash cancel ( ) when bracketing is selected. • An attached Minolta accessory flash will be set to off when bracketing is selected. • If an AF series flash is mounted and on when bracketing is selected, will blink in the data panel and the shu…