Minolta DYNAX 5 Instruction Manual

38, 75 DETAILED OPERATION Hold the focus-mode switch down and release. • will appear on the data panel. Turn the focusing ring until your subject appears sharp. • While pressing the shutter-release button partway down, appears in the viewfinder when the subject in the focus frame is in focus. …

51, 101 DETAILED OPERATION 100 Press the shutter-release button all the way down to take the picture. Press the flash-mode button when taking the picture. • Both flashes will fire when the shutter is release. • A lighting ratio of 2:1 indicates the expo- sure from the main light (accessory …

4, Minolta DYNAX 5 76 FOR PROPER AND SAFE USE Read and understand all warnings and cautions before using this product. Using batteries improperly can cause them to leak harmful solutions, overheat, or explode which may damage property or cause personal injury. Do not ignore the following warnings. …

41, 81 DETAILED OPERATION 80 Set the shutter speed to bulb when you want to take time exposures. When bulb is selected, the shutter remains open as long as the shutter-release button is pressed. The camera’s exposure meter does not work with bulb. Mount the camera on a tripod. Set the camera t…

5, 98 • Do not point the product directly at the sun. If sunlight is focused on an inflammable surface, a fire may result. Replace the lens cap when the product is not in use. • Do not use or store the product in a hot or humid environment such as the glove compartment or trunk of a car…

20, 3938 SUBJECT PROGRAM / DRIVE MODES Now that you are comfortable with the operation of the camera, take more control of the creative process by telling the camera what kind of pictures you want to take. The subject-program modes optimize camera settings for specific situations. This section al…