Minolta PageWorks Pro 25 Operation & User’s Manual

62, 3-7 Using the Control Panel Using the Printer Chapter 3 PCL Menu • Italicized items indicate optional units and accessories that will be displayed only when installed. Item Factory Default User Selection FONT SOURCE INTERNAL INTERNAL, DOWN- LOAD FONT FONT NUMBER 0 0-999 PITCH 10.00 0.44-9…

216, 7-21 Print Quality Problems Troubleshooting Chapter 7 Uneven print den- sity The toner may be unevenly distributed inside the imaging cartridge. Remove the imaging cartridge and shake it left and right a few times to distribute remaining toner. The imaging cartridge may be defective. Remove…

272, 8-37 SIMM (Single In-line Memory Module) Installing Options Chapter 8 4 Remove the seven screws that hold the metal cover of the printer in place with a screwdriver and remove the metal cover. Caution 5 Being careful not to touch the connection points along the edge of the SIMM, insert the SIMM in…

179, 6-6 Replacing the Imaging Cartridge Maintenance Chapter 6 Note 7 Close the side cover. • Do not grasp the imaging cartridge’s shutter. Doing so may damage the cartridge. Be sure to use the handle . • To avoid reducing print quality, do not touch the protective shutter of the imaging car…

116, Minolta PageWorks Pro 25 3-61 Adjusting the left margin Using the Printer Chapter 3 8 Press the Select key as many times as necessary to change the margin setting and press the Enter key. The left offset decreases by increasing the margin value. The left offset increases by decreasing the margin value. 9 Repeat ste…

254, 8-19 Installing the 2500 Sheet Tray (LCC) Installing Options Chapter 8 Installing the 2500 Sheet Tray (LCC) This optional paper feed unit can be used to expand the paper capacity of the printer for convenient, high-volume printing. 1 Remove the 2500 sheet tray (LCC) from its carton and remove …